Software Version; Showroom Programme (Demo Mode); Factory Defaults - Miele CVA 7440 Operating And Installation Instructions

A message will appear in your coffee
machine display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
coffee machine is switched on again,
you will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
an update is available.
– Once an update has been installed, it
cannot be undone.
– Do not switch the coffee machine off
during the update. Otherwise, the
update will be aborted and will not be
installed.
– Some software updates can only be
carried out by the Miele Customer
Service Department.

Software version

The "Software version" menu option is
intended for the Miele Customer
Service Department. You do not need
this information for domestic use.
Showroom programme (Demo
mode)
Do not activate this setting for
domestic use.
The Showroom programme
function enables the coffee machine to
be demonstrated in shops or
| Demo mode
showrooms. In this mode, the machine
lights up but no drinks can be prepared
and no maintenance programmes can
be run.
The coffee machine cannot be
switched off with the On/Off button 
when Demo mode is activated.

Factory defaults

You can reset the coffee machine to its
factory default settings.
The following will not be reset:
– The number of drinks dispensed
and the machine status (No. of
portions until machine needs
descaling, ... brew unit needs
degreasing)
– Language
– Time and date
– Profiles and the associated drinks
– Miele@home
Settings
49