Noise And Vibration Data; Noise Data; Vibration Data - Fayat Group Dynapac DFP11 Operating Instructions Manual

Technical data – Noise and vibration data

2.1 Noise and vibration data

2.1.1 Noise data

Sound pressure level at the opera-
tor's stand
Guaranteed sound power level

2.1.2 Vibration data

Hand-arm vibration
Hand-arm vibration with comfort
guide handle (optional equipment)
14
The following noise and vibration data were determined in accord-
ance with the following guidelines under equipment specific condi-
tions and by using harmonized standards:
n EU Machine Directive edition 2006/42/EU
n Noise Emission Directive 2000/14/EU, Noise Protection Direc-
tive 2003/10/EU
n Vibration Protection Directive 2002/44/EU
During operation these values may vary because of the prevailing
operating conditions.
L = 95 dB(A), determined acc. to ISO 11201 and EN 500.
pA
WARNING!
Loss of hearing caused by too high noise bur-
dens!
– Wear your personal protective equipment (ear
protection).
L = 108 dB(A), determined acc. to ISO 3744 and EN 500.
WA
Vector total of the weighted effective acceleration in three orthog-
onal directions:
Total vibration value a
acc. to ISO 5349 and EN 500.
Associated uncertainty K = 0.3 m/s
12096.
Observe the daily vibration load (work safety acc. to 2002/44/EC).
Vector total of the weighted effective acceleration in three orthog-
onal directions:
Total vibration value a
acc. to ISO 5349 and EN 500.
Associated uncertainty K = 0.1 m/s
12096.
Observe the daily vibration load (work safety acc. to 2002/44/EC).
DFP11
2
= 4.1 m/s on crushed rock determined
hv
2 , determined acc. to EN
£ 2.5 m/s
2
on crushed rock determined
hv
2 , determined acc. to EN