Selecting Cleaning Mode; Auto Cleaning Mode - ECOVACS DEEBOT 605 Instruction Manual

3.3 Selecting Cleaning Mode

1

AUTO Cleaning Mode

A Random Cleaning Pattern (optimized for carpets) will be selected by
default.
Note: Cleaning pattern cannot be switched until DEEBOT is paused or charging. DEEBOT will start a new cleaning cycle once cleaning pattern is
switched. will light up once Programmed Cleaning Pattern is enabled.
OR
3. Operating and Programming
To switch to a Programmed Cleaning Pattern (optimized for hard floors)
or switch between these two patterns, perform the following action:
x2
OR
13
EN