List Of Commands - Panasonic FP7 Series Additional Functions Manual

MEWTOCOL-COM

5.1 List of Commands

The following new commands are supported.
List of commands
Command name
Read timer set value area
Write timer set value area
Read timer elapsed value area
Write timer elapsed value area
(Note 1) Some devices cannot be accessed due to format limitations of MEWTOCOL-COM communication
commands.
(Note 2) With the four MEWTOCOL-COM commands newly supported, it is possible to access the timer and counter
on the conventional models (FP2/FP2SH). On FP7, however, it is possible to access the timer only.
(Note 3) "H0000" is written to the high words of TS or TE.
5-2
Code Overview
RS Reads the timer set value (lower 16 bits of TS).
WS Writes to the timer set value (lower 16 bits of TS). (Note 3)
RK Reads the timer elapsed value (lower 16 bits of TE).
WK Writes to the timer elapsed value (lower 16 bits of TE). (Note 3)