Introduction; Purpose Of This Document; Scope Of This Document; History - Siemens DS III PROFIsafe Series Product Information

Introduction

1.1

Purpose of this document

This document contains information and safety notes that you will require when using the
pressure transmitter in safety-instrumented systems.
It is aimed at persons who install the device mechanically, connect it electrically,
parameterize and commission it, as well as at service and maintenance engineers.
1.2

Scope of this document

This document deals with the pressure transmitters exclusively as a part of a safety function.
This documentation is applicable only in connection with the following documentation:
No.
/1/
1.3

History

This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware:
Edition
01
06/2006
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
01
06/2006
Functional safety for SITRANS P, series DS III PROFIsafe
Product information, 07/2006, A5E00849297-01
Name
Operating Instructions for SITRANS P, series DS III PA
Firmware identification type
plate
FW: from 301.02.01K
Remark
First edition
Order number
A5E00053276
System integration
PDM V 6.0.2;
DD version 01.02.01.50
1
Installation path for PDM
SITRANS P DS III PA
PROFIsafe
1-1