Utility Menu; Status Messages - thomann Millenium MPS-450 User Manual

Operating
6.12

Utility menu

Adjusting device settings
6.13

Status messages

26
In this menu, you can change various settings of the device.
1.
Press [UTILITY].
ð The display shows the Utility menu.
2.
Press [PAGE] repeatedly until the desired sub menu is displayed.
3.
Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter
value.
Param‐ Display
eter
GM GM XXX
MODE
AUTO POW XXX
POWER
Status message Meaning
REC FUL The storage capacity for the recording is exhausted.
FAC SEt The factory reset is complete.
EMP The user song list is empty.
OK The device settings and drum kit settings have been saved.
WAT Data is loaded from the flash ROM, please wait.
e-drum module
Meaning
Defines the processing of pro‐
gramme change commands: ON:
Programme change commands
for MIDI channel 10 are processed
as selection (GM kit). OFF: Pro‐
gramme change commands for
MIDI channel 10 are processed as
selection (local kit).
Defines the behaviour of the auto‐
matic shutoff:
n '30' (automatic shutoff after
30 minutes)
'60' (automatic shutoff after
n
60 minutes)
'OFF' (automatic shutdown
n
off).
Value
range
ON, OFF
30, 60,
OFF