Recording Functions - thomann Millenium MPS-450 User Manual

6.7 Recording functions

Recording preparation
Starting and stopping recording
Param‐ Display
eter
TIME SIG‐ SIG XXX
NATURE
INTERVAL INT XXX
VOLUME VOL XXX
NAME NUM XXX
This feature allows you to use the drum module for recording. You can record your
own drum track with or without an accompanying song. The recording can be stored
in 5 user songs as a MIDI file directly in the drum module or stored in an MP3 file on a
USB stick.
1.
Hold down [SONG/REC] for about 2 seconds.
ð The indicator LED of the button flashes.
2. Use the arrow buttons ([<] / [>]) or the jog wheel to select the user song (dis‐
play shows '81' ... '85' ) in which the recording is to be stored.
3.
Press [ST/SP].
ð The display shows 'RDY' . The device is now record-enabled.
1. When the device is record-enabled (the display shows 'RDY' ), press [ST/SP] or
hit a pad.
ð The recording starts after 4 beats. The display shows 'ING' .
2.
To stop recording, press [ST/SP].
ð The indicator LED of the button goes out.
3. Press [ST/SP] to play the recorded song.
When the recording capacity is exhausted, the display shows 'REC FUL' . The
recording then stops automatically.
MPS-450
Meaning
Emphasis on beats
Beats per measure
Click volume
Name and number of the cor‐
responding Click voice
Operating
Value range
0 ... 9/2, 0 ... 9/4,
0 ... 9/8,
0 ... 9/16
1/2, 3/8, 1/4, 1/8,
1/12, 1/16
0 ... 5
1 ... 6
19