Common Alarm Information Analysis And Solution - EVOC EIC-3011 User Manual

Appendix
Plug and play I/O
card, no IO card is
detected or no IO
card can be used
when used again

9.2 Common Alarm Information Analysis and Solution

Alarm Information
EFI BIOS. After the product is booted,
the screen displays
information "Warning system time is
invalid，please set it to right".
After bootup of motherboard, the screen
shows: "Reboot and Select proper Boot
device or Insert Boot Media in selected
Boot device and press a key".
Award BIOS motherboard. During Power
On Self Test (POST), the screen displays
error information: "Keyboard error or no
keyboard present".
System files on the hard
disk are damaged
Poor contact of the slot
yellow alarm
Enter the system (usually WinPE
system) with a bootable disk;
check whether the system in the
hard disk is damaged. Reinstall
the system if necessary.
Poor contact is usually caused by
frequent
uninstallation of the PCI or ISA
card, unstable fixing or improper
dust-proof measures;
remove and install the card for a
few times or use another slot.
Meaning and Solution
Motherboard CMOS time setting
error, which needs to be corrected.
The current disk cannot be booted,
and the system HDD cable needs to be
rechecked, or use optical drive for
reinstallation of operating system.
The motherboard or complete PC is
not connected to PS/2 or USB
keyboard, and keyboard needs to be
connected properly.
EIC-3011
installation/
please
· 37 ·