Table of Contents
Advertisement
Quick Links
Legal Information
Warnings
Please pay attention to the tips within the manual so as to avoid personal injury or
property losses. The tips for personal injury are indicated in warning triangles while
the tips only related to property losses have no warning triangles. The warning tips are
listed as follows with the hazardous scale from severe to slight.
Danger
If handled carelessly, death or severe human injury will occur.
Warning
If handled carelessly, death or severe human injury might occur.
Caution
Warning triangle indicates that slight human injury might occur if handled
carelessly.
Note
Unexpected result or status might occur, if not handled according to the tips.
Professional Personnel
The product/system covered by the manual can only be handled by qualified and
professional personnel. During operation, please follow the respective instructive
manuals, especially the safety warnings. The professional personnel have been trained
and possess relevant experiences; therefore, he/she could be aware of the risks of the
product/system and avoid possible damages.
EVOC Product
Please pay attention to the following instructions:
Warning
EVOC product can only be used according to the descriptions within the manual,
including the contents and the relevant technical documents. If the products or
components from other companies are required, please get the recommendation
and grant from EVOC first. Proper transportation, storage, assembly, installation,
debugging, operation and maintenance are prerequisite to ensure product safety
and normal operation; therefore, please ensure permitted environment conditions
and pay attention to the tips within the manual.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EVOC NPC-8208
Summary of Contents for EVOC NPC-8208
- Page 1 Please pay attention to the following instructions: Warning EVOC product can only be used according to the descriptions within the manual, including the contents and the relevant technical documents. If the products or components from other companies are required, please get the recommendation and grant from EVOC first.
- Page 2 Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies.
- Page 3 About this manual Scope of the Manual The manual is appropriate for EVOC NPC-8208. Convention The term “the PC” or “the Product” within the manual usually stands for EVOC NPC-8208. Instructions Safety instructions To avoid property losses or individual injury, please pay attention to the safety instructions within the manual.
- Page 4 Safety Instructions General Safety Instructions Caution Before you have read related safety instructions, please do not expand your device. This device is compliant with related safety requirements. If you have any doubt about the effectiveness of installation in the planned environment, please contact your service representative.
- Page 5 ESD Instructions The following label can be used to identify the modules that contain electrostatic sensitive devices: When operating the modules that contain electrostatic sensitive devices, please follow the instructions below: When operating the modules that contain electrostatic sensitive devices, make sure to release static electricity on your body (for example, by touching a grounded object).
-
Page 6: Table Of Contents
Contents 1. Product Introduction ....................1 1.1 Overview .......................1 1.2 Specifications ....................2 1.3 Operating Instructions ...................6 1.3.1 External Functions................6 1.3.2 Internal Layout ..................7 1.3.3 Operation Control................7 1.4 Status LED ....................8 2. Application Scheme ....................9 2.1 Transportation....................9 2.2 Storage......................9 2.3 Opening the Box and Initial Examination............10 2.3.1 Opening the Box................10 2.3.2 Markings for PC Identification............10 2.4 External Environment Conditions ............... - Page 7 5.1 Operating System ..................15 5.2 Port Definition .....................15 5.2.1 COM Ports ..................15 5.2.2 Network Port ...................16 5.2.3 USB Port ..................16 6. Software Introduction .....................17 6.1 BPI Overview ....................18 6.2 FMI Overview .....................20 6.3 eManager Software..................21 6.3.1 Operating Environment ..............22 6.3.2 Function...................22 6.3.3 Firmware Management..............26 6.4 eDisk......................28 6.4.1 Driver Program................29...
- Page 8 8.1 Removal/Installation of Hardware Assembly ..........40 8.1.1 Carry out Maintenance ..............40 8.1.2 Preventative Maintenance ...............40 8.1.3 Replacing Backup Battery ...............41 8.2 Installing the Drivers ...................42 9. Dimensions Drawing ....................43 9.1 Dimensions Drawing Overview..............43 9.2 Product Outline Dimensions Drawing ............43 9.3 Installation Dimensions Drawing ..............44 9.3.1 Product Installation Dimensions Drawing........44 10.
-
Page 9: Product Introduction
ENS modular cards used for optical port or electrical port expansion. The product also supports single power supply or redundant power supply, and can meet various network security application requirements in the market. NPC-8208 can be widely used in firewall, anti-virus wall, load balance, Internet-based behavior management audit,... -
Page 10: Specifications
Supports VGA display (optional); supports hot swap function Supports DVI display (optional) Display Supported minimum resolution: 640×480 @60Hz; supported maximum resolution: 1920×1200 @60Hz 1 x 10/100/1000Mbps LAN port, LAN1 supports Network Wake-On-LAN; LAN1 supports network PXE boot · 2 · NPC-8208... - Page 11 Expansible to one PCIE X8 card; supports 120mm height; 300mm length; compatible with PCIE3.0 standard Expansion bus Expansible two four 4 EVOC standard ENS modular cards. Note: Either PCIE X8slot or ENS1 can be used. 1 x COM port (RJ45), supporting serial port...
- Page 12 0.5mm (power-on status) environmental Anti-shock: 10g acceleration, 11ms duration adaptability Noise: ≤55dB Input voltage/frequency: 220VAC/50Hz Power consumption of the PC: 83.2W (standby status) Power feature Power consumption of the PC: 116W (operating BurnIntest 100%) · 4 · NPC-8208...
- Page 13 Note: 3， NPC-8208 supports RAID card option (RAID card model: ERM-1221T) 4， NPC-8208 contains CPU with no more than 80W power consumption, 250W power supply as standard configuration. If 80W or above CPU needs to be used (such as i5-6600K, i7-6700K) or the PC is used together with large power consumption PCIE card, power supply with larger power consumption must be used.
-
Page 14: Operating Instructions
Product Introduction 1.3 Operating Instructions 1.3.1 External Functions Front View Location Description I/O module ENS module bracket HDD Group Rear View Location Description Cooling fan Converter board bracket Bypass switch Ground screw 350W power supply module (optional) · 6 · NPC-8208... -
Page 15: Internal Layout
When the PC executes hardware reset, data may be lost. Control Button Location Description On/Off button used to switch on/off the PC. Reset button A pointed object or a clip can be used to operate the reset button. Pressing this button will trigger hardware reset NPC-8208 · 7 ·... -
Page 16: Status Led
Product Introduction 1.4 Status LED Display Meaning Description Disconnected from power POWER Displaying PC status Green PC is operating No access Displaying hard drive status Yellow Being accessed · 8 · NPC-8208... -
Page 17: Application Scheme
Under this circumstance, please make sure no water drop (condensation) is formed on the surface or interior of the device. If condensation is formed on the device, please wait for over twelve hours before connecting the device. NPC-8208 · 9 ·... -
Page 18: Opening The Box And Initial Examination
When the product needs to be repaired or after it has been stolen, these codes can be used to identify the PC. Please do not rip them off. Serial number: located on the chassis body (as shown below) · 10 · NPC-8208... -
Page 19: External Environment Conditions
Please do not block the ventilation hole of the PC. The installation position requirement for the PC should be always observed. The connected or installed I/O should not generate reverse voltage of more than 0.5V inside the PC. NPC-8208 · 11 ·... -
Page 20: Product Installation
Step: As shown in the left picture, use screws to fasten the PC onto the cabinet Note: The PC must be placed on the supporting board or guiding rail. Do not fasten the PC only by the screws on the front panel. · 12 · NPC-8208... -
Page 21: Pc Connection
PC is powered off. 4.2 Product Grounding Low impedance ground connection is more helpful to release the interference produced by the external cables, the signal cables or the cables connecting the IO module to the grounding system. NPC-8208 · 13 ·... -
Page 22: Connecting The Device To Power
Danger Disconnect the power source and data cable during a lightning storm. Attention The PC is completely isolated from the power supply only by disconnecting the power connector. · 14 · NPC-8208... -
Page 23: Debugging
USB controller. 5.2 Port Definition 5.2.1 COM Ports The PC provides one RJ45 type COM port, and supports serial port redirection function. Its pin definition is as follows: Signal Name RTS# DTR# COM1 DSR# CTS# NPC-8208 · 15 ·... -
Page 24: Network Port
Green 1000Mbps Data being Flash Orange 100Mbps transmitted No data being 10Mbps transmitted 5.2.3 USB Port Two USB2.0 ports at front panel. Their pin definitions are as follows: Signal Name +5V_USB USB_Data- USB_Data+ USB1, USB2 · 16 · NPC-8208... -
Page 25: Software Introduction
Supported Range Name BIOS programming interface specification, which provides All supporting BPI motherboards unified interface for software to and PCs of EVOC company access hardware. A platform management All the motherboards/complete PCs that support BPI can run application software developed... -
Page 26: Bpi Overview
Software Introduction 6.1 BPI Overview EVOC BPI (BIOS Programming Interface) is a cross-platform, easy-to-maintain software interface specification, which supports access to hardware under the Protected Mode of 32-bit or 64-bit operating system and supports multi-process and multi-threading hardware access. BPI is a bridge between hardware and application software, and its purpose is to provide a unified standard interface for the application layer (in the form of library function, similar to library function of standard C). - Page 27 Security and High Reliability The BPI function library accessing the hardware is programmed by the motherboard developer and is strictly tested; therefore, it can avoid system malfunction caused by improper operation of the system hardware. NPC-8208 · 19 ·...
-
Page 28: Fmi Overview
PC, total heart beat times of the CPU. eLog management information can provide valuable reference for failure analysis and product upgrade. eDisk eDisk is a virtual onboard disk device. It is a floppy drive device used for · 20 · NPC-8208... -
Page 29: Emanager Software
“Start”→“Program”→“EVOC” →“evoc_bpi_x”. 6.3 eManager Software eManager software is a device management platform software developed by EVOC. eManager software can be used for system operation abnormality monitoring, setup of GPIO input/output mode and electrical level, real-time monitoring of temperature, fan and voltage status. -
Page 30: Operating Environment
BPI3.0 installation packet we provided for installation and boot it up. (Operation of win7 and above operating system needs administrator authority). 6.3.2 Function 1. Welcome Interface After the software is opened, the following welcome interface will appear: · 22 · NPC-8208... - Page 31 Function: Monitors whether the system can be normally operated, and carry out reset for abnormality. When abnormality occurs to the system, Watchdog cannot be fed automatically. After counting-down is finished, the system will restart, and recover from system error. NPC-8208 · 23 ·...
- Page 32 Software Introduction 3. GPIO · 24 · NPC-8208...
- Page 33 “Setup” button on the right. If it is a network-type motherboard, the special LED of the motherboard will also be displayed and can be set up. Function: Setup of GPIO and Network LED 4. Hardware Detection NPC-8208 · 25 ·...
-
Page 34: Firmware Management
Method: After the software switches to hardware detection interface, it will automatically acquire temperature, fan speed, voltage and other information, refreshing at a 2S interval. Function: real-time acquisition of hardware operating status. 6.3.3 Firmware Management 1、HDD SMART · 26 · NPC-8208... - Page 35 HDD performance will be displayed in the list box. Function: To check SMART information related to HDD performance, which helps predict service life of HDD, and avoid data loss caused by damage to HDD. 2. Boot-up time NPC-8208 · 27 ·...
-
Page 36: Edisk
Please refer to the complete routine of VB, VC, C++Builder, Delphi and BPI Programming Interface Operation Manual in the enclosed CD. 6.4 eDisk eDisk is a section of flash storage space integrated on the motherboard. By the eDisk · 28 · NPC-8208... -
Page 37: Driver Program
Windows system on the target platform (motherboard or complete PC), users can directly run Setup.exe under the eDisk driver program menu, and carry out the installation according to the prompts. After the installation is finished, reboot the NPC-8208 · 29 ·... -
Page 38: Using Method Of Edisk Under Windows
Linux system, following three steps must be executed: Compile driver: make clean make Load driver: insmod oem_driver.ko Mount device: mount /dev/ramdisk /mnt afterwards, read/write can be carried out for /mnt menu. If formatization is needed before Step 3, following commands can be executed: · 30 · NPC-8208... -
Page 39: Econ-Xpe System
Windows XP Professional, but also has Enhanced Write Filter and other functions that Windows XP system does not have. Meanwhile, eCon-XPE operating system also integrates EVOC BPI and system logo self-defined software. 6.5.1 Enhanced Write Filter (EWF) 1. Purpose and Function EWF (Enhanced Write Filter) is a function which can only be used for Windows Embedded operating system. - Page 40 Write protection drive C: Enable ewfmgr c:-enable Write protection drive C: Disable ewfmgr c:-commitanddisable (Revised file accepted) Revised file accepted on Drive C: ewfmgr c:-commit Display information related ewfmgr c: EWF driver program Displays Help ewfmgr c:/h · 32 · NPC-8208...
- Page 41 Because this file is prevented from change by EWF, the mark will be lost during boot order, and will be readjusted. Therefore, it is recommended to disable automatic adjustment and manually adjust the clock. NPC-8208 · 33 ·...
-
Page 42: Logo Self-Defined Software
Logo Self-defined Software is a tool software used to replace operating system logo. It realizes replacement of operating system power-on logo, login logo, logoff logo and power-off logo. The using method is described as below: Start menu->Program->EVOC->eConLogo, operating Logo Self-Defined Software, as shown below: Select Login Screen to replace login Logo: ·... - Page 43 Software Introduction Click Replace Resource and skip to replacement interface, select the picture for replacement. Click Replace to finish replacement. NPC-8208 · 35 ·...
- Page 44 If the software is used under the current system, when replacing log-off and power-off logo, prompts will ask whether to enter DOS system or WinPE system to replace related file. If the software is to be used under WinPE, replacement can be finished directly. · 36 · NPC-8208...
-
Page 45: Installing Expansion
“ESD Guideline” for regulations related to operation of ESD-sensitive components. Preparation Work Disconnect the PC from the power source. Steps to open the PC Loosen the captive screw Take the captive screws as handle to pull backward. NPC-8208 · 37 ·... -
Page 46: Installation/Removal Cfast Card
Please see the “ESD Guideline” for regulations related to operation of ESD-sensitive components. Installing the CFAST Card Steps of installation Insert the CFAST card Use screws to fasten the CFAST card fixing bracket · 38 · NPC-8208... - Page 47 Installing Expansion Removing CFAST Card Steps of removal Loosen screws fastening the CFAST card fixing bracket Pull out the CFAST card NPC-8208 · 39 ·...
-
Page 48: Pc Maintenance
To maintain relatively high system availability, it is recommended to preventatively replace the quick-wear parts. The table below give the time interval for replacement: Assembly Time Interval for Replacement 3 years CMOS backup battery 5 years · 40 · NPC-8208... -
Page 49: Replacing Backup Battery
3. Disconnect the PC from power source. Replacing Battery Steps to replace battery Open the PC Remove the motherboard. Note: place the motherboard on a desktop with anti-electrostatic protection. Press the clamp which fasten the battery, and remove the battery. NPC-8208 · 41 ·... -
Page 50: Installing The Drivers
If the time for battery replacement is over 30 seconds, the configuration data of the PC will be lost. In this situation, reconfiguration of BIOS Setup is needed. 8.2 Installing the Drivers Regarding the installation of driver program of this product, please refer to the enclosed CD. · 42 · NPC-8208... -
Page 51: Dimensions Drawing
9.1 Dimensions Drawing Overview This section includes the following dimensions drawings: Product Outline Dimensions Drawing Product Installation Dimensions Drawing Note: The unit in the dimensions drawing is usually millimeter. 9.2 Product Outline Dimensions Drawing 88.1 88.1 482.6 Unit: mm NPC-8208 · 43 ·... -
Page 52: Installation Dimensions Drawing
Dimensions Drawing 9.3 Installation Dimensions Drawing 9.3.1 Product Installation Dimensions Drawing 482.6 R3.4 × Unit: mm · 44 · NPC-8208... -
Page 53: Appendix
2. Please check whether the Power cable or display display cable correctly cable is not connected connected with the display and the system unit. 3. Contact Technique Support if the screen remains black after implementing above measures. NPC-8208 · 45 ·... - Page 54 No system disk can The HDD power cable disk (the hard disk shall be found when or data cable is not installed with operating system powering on connected well bootable) well connected. · 46 · NPC-8208...
-
Page 55: Common Alarm Information Analysis And Solution
Award BIOS motherboard. During Power The motherboard or complete PC is On Self Test (POST), the screen displays not connected to PS/2 or USB error information: “Keyboard error or no keyboard, and keyboard needs to be keyboard present”. connected properly. NPC-8208 · 47 ·... -
Page 56: Esd Guideline
ESD current may lead to potential problem of the module, or damage to the mo dule which is not serious for the momen t but may cause fault during operation. · 48 · NPC-8208... - Page 57 Usually, people only contact ESD-sensitive device in unavoidable circumstances (f example, for repair). When holding the module, do not touch any chip pin or PCB circuit. In this way, the dissipated electricity will not affect the ESD-sensitive device NPC-8208 · 49 ·...
-
Page 58: Abbreviations
Advanced Programm able Extended programm able APIC Interrupt Controlle interrupt controller Advanced Pow A tool used to monitor and lower agement C power consumption. Automation System After-s ales Infor mation ASIS System Advanced Technology · 50 · NPC-8208... - Page 59 Complementary Metal-oxide CMOS Semi-conductor Semi-conductor Certificate Of Authenticity Microsoft Windows pr oduct key Certificate of License License authorization Serial Communication Port Serial Port Communications Processor Comm unication PC Cent ral Processing Unit Cathode Ray Tube NPC-8208 · 51 ·...
- Page 60 Data terminal ready Data terminal ready Digital Versatile Disc Digital Versatile Disc ital Video Interf Digital Video Interface Digital Video Digital video po rt with digital DVI-I Interface-Integrated and VGA signals Error Correcting Code Error Correcting Code · 52 · NPC-8208...
- Page 61 Enhanced Parallel Port Two-way Centronics port aracter for exit ontrol character Enhanced Write Filter Frequently Asked Question FAT 32 -bit File Allocation Tabl 2-bit File Allocation Table File Based Write F ilter Floppy Disk Disk drive, 3.5" NPC-8208 · 53 ·...
- Page 62 HTTP Hypertext transfer protocol ternet rdwa Hardware Input/Output Data input/out of the computer Inte l(R) Applicati Accelerator Integra ted Drive Elect ronics International Electrotechnical Commission Integrated Graphic Device Ingress Protection Protectio n level Infrared Infrared · 54 · NPC-8208...
- Page 63 Signaling Drive Media Access Control Media Access Control Memory card in credit card Memory Card format Machin e-readable p roduct MLFB designation Micro Memory Card 32*24.5mm format memory card Multiple Point Interface Used for Programming Devices NPC-8208 · 55 ·...
- Page 64 Manufactures Association manufacturers N on Maskable Interrupt Interrupt cannot be refused New Technology File Safety file system of Windows NTFS System ersion (2000, XP, Vista) Optical Disc Drive Standardized nterface OLE for Process Control industrial process · 56 · NPC-8208...
- Page 65 HDD data PC via network Redundant Arrays of RAID Redundant HDD array independent Disks Install device operation Restricted Access Location facility with restricted access (e.g. control cabinet with lock) Random Access Memory Ringing Input Call in Read-Only-Memory NPC-8208 · 57 ·...
- Page 66 HDD error diagnosis procedure and Reporting Technology To transmit short message by Short Messaging Service telecommunication network Simple Network SNMP Network protocol Management Protocol Small Outline Dual Inline SO-DIMM Memory Module Safety Card on Motherboard (SOM) · 58 · NPC-8208...
- Page 67 Inc. country or two countries (using CSA/Canada) Unified Memory Video memory Architecture Complete address mark Unified Resource Locator Internet page Universal Serial Bus Graphics standard, with Ultra eXtended Graphics UXGA maximum resolution Array 1600x1200 pixel NPC-8208 · 59 ·...
- Page 68 (e.g. VT-D Technology for Directed I/O network adapter) virtual device. Windows 2000 Loss-free file format used for Wavelength encoding audio data Monitoring program using error Watchdog detection and alarm WLAN Wireless LAN Wireless LAN Wake-On-LAN · 60 · NPC-8208...
-
Page 69: Terminology Glossary
IDE port. CF card can be operated by connector and socket adapter, and other electronic components on the PCMCIA or IDE HDD controller are not needed. There are two kinds of design specifications: CF-I (42.6×36.4×3.3 mm) and CF-II (42.8×36.4×5 mm)。 NPC-8208 · 61 ·... - Page 70 Wake-On-LAN (WoL) This function supports bootup of the PC via LAN port. LPT port LPT port (Centronics port) is a parallel port used to connect printer. · 62 · NPC-8208...
- Page 71 The association is composed of about 450 company members in the computer industry. It focuses on providing international standards for miniaturization and flexible use of device expansion card, so as to provide basic technology for the market. NPC-8208 · 63 ·...
- Page 72 (such as parity bit) on at least two hard disk volumes, so as to improve reliability and performance. Hard disk array is controlled by hard drive controller which manages program and corrects errors. RAID system is usually realized in network server. · 64 · NPC-8208...
- Page 73 The installation method of solid-state drive is similar to any other drive. It only uses semi-conductor memory chip of similar capacity, so it does not include rotating disk or other mobile assembly. This design makes SSD more rugged and endurable, NPC-8208 · 65 ·...
- Page 74 (e.g. Windows XP Professional). Hyper-Threading HT technology (multiple threads) allows multiple computing threads to run simultaneously. Only when all the related system assemblies (e.g. processor, operating system and application program) are supported, can HT be effective. · 66 · NPC-8208...
- Page 75 Used as a buffer for high-speed access of relay storage (buffer) of the requested data. Plug and Play It usually refers to the capability of automatic configuration system of the computer to communicate with peripheral devices (such as monitor, modem or printer). Users can NPC-8208 · 67 ·...
- Page 76 -> boot. Module Modules refer to PLC, programming device or plug-in unit. These modules can be · 68 · NPC-8208...
- Page 77 PC. Dual-core CPU Compared with last-generation single-core CPUs using hyper-threading technology, dual-core CPU remarkably improves the speed of computing and program execution. NPC-8208 · 69 ·...
- Page 78 Warm boot the computer (Ctrl + Alt + Del) without disconnecting power source. Motherboard Motherboard is the core part of a computer. Motherboard is used to process and store data, control and manage ports and device I/O. · 70 · NPC-8208...
Need help?
Do you have a question about the NPC-8208 and is the answer not in the manual?
Questions and answers