Advertisement

Quick Links

Legal Information
Warnings
Please pay attention to the tips within the manual so as to avoid personal injury or
property losses. The tips for personal injury are indicated in warning triangles while
the tips only related to property losses have no warning triangles. The warning tips are
listed as follows with the hazardous scale from severe to slight.
Danger
If handled carelessly, death or severe human injury will occur.
Warning
If handled carelessly, death or severe human injury might occur.
Caution
Warning triangle indicates that slight human injury might occur if handled carelessly.
Note
Unexpected result or status might occur, if not handled according to the tips.
Professional Personnel
The product/system covered by the manual can only be handled by qualified and
professional personnel. During operation, please follow the respective instructive
manuals, especially the safety warnings. The professional personnel have been trained
and possess relevant experiences; therefore, he/she could be aware of the risks of the
product/system and avoid possible damages.
EVOC Product
Please pay attention to the following instructions:
Warning
EVOC product can only be used according to the descriptions within the manual,
including the contents and the relevant technical documents. If the products or
components from other companies are required, please get the recommendation and
grant from EVOC first. Proper transportation, storage, assembly, installation,
debugging, operation and maintenance are prerequisite to ensure product safety and
normal operation; therefore, please ensure permitted environment conditions and
pay attention to the tips within the manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EIC-3011 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EVOC EIC-3011

  • Page 1 Please pay attention to the following instructions: Warning EVOC product can only be used according to the descriptions within the manual, including the contents and the relevant technical documents. If the products or components from other companies are required, please get the recommendation and grant from EVOC first.
  • Page 2 Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies.
  • Page 3 About this manual Scope of the Manual The manual is appropriate for EVOC EIC-3011. Convention The term “the PC” or “the Product” within the manual usually stands for EVOC EIC-3011. Instructions Safety instructions To avoid property losses or individual injury, please pay attention to the safety instructions within the manual.
  • Page 4 Safety Instructions General Safety Instructions Caution Before you have read related safety instructions, please do not expand your device. This device is compliant with related safety requirements. If you have any doubt about the effectiveness of installation in the planned environment, please contact your service representative.
  • Page 5 ESD Instructions The following label can be used to identify the modules that contain electrostatic sensitive devices: When operating the modules that contain electrostatic sensitive devices, please follow the instructions below:  When operating the modules that contain electrostatic sensitive devices, make sure to release static electricity on your body (for example, by touching a grounded object).
  • Page 6: Table Of Contents

    Contents 1. Product Introduction ....................1 1.1 Overview .......................1 1.2 Specifications ....................2 1.3 Operating Instructions ...................4 1.3.1 External Functions................4 1.3.2 Internal Layout ..................5 1.4 Status LED.....................6 2. Application Scheme ....................8 2.1 Transportation....................8 2.2 Storage......................8 2.3 Opening the Box and Initial Examination............9 2.3.1 Opening the Box................9 2.3.2 Markings for PC Identification............9 2.4 External Environment Conditions ..............9...
  • Page 7 5.2.2 USB Port ..................17 5.2.3 Power Connector ................18 5.2.4 LAN Port..................18 5.2.5 ALARM Port ...................19 5.2.6 Display Port..................19 6. Software Introduction .....................20 6.1 BPI Overview ....................21 6.2 FMI Overview .....................23 6.3 eManager Software..................24 6.3.1 Operating Environment ..............24 6.3.2 Function...................25 6.3.3 Firmware Management..............28 7.
  • Page 8: Product Introduction

    Product Introduction 1. Product Introduction 1.1 Overview EIC-3011 is a micro network security control platform complete PC. Based on Intel® latest Atom Bay Trail SoC platform, the PC contains onboard DDR3 8GB/4GB memory, and features ergonomic structure design, small form factor,...
  • Page 9: Specifications

    2 x standard USB2.0 port; External IO  2 x power input connector; ports  2 x GbE network ports (By configuring different network modules, the product supports expansion to two electrical ports, two optical ports or four electrical ports.) · 2 · EIC-3011...
  • Page 10 GB/T 17626.4-2006 Burst Immunity Level(2)  GB/T 17626.5-2008 Surge(impact) immunity Level(2)  MTBF≥30000h ELIABILITY  MTTR≤0.5h Meets basic requirements for GB4943 Safety  Anti-vibration: 0-10Hz/0.3mm amplitude; Mechanical 10-150Hz/1.0g acceleration (power-on status) environmental adaptability  Anti-shock: 15g acceleration, 11ms duration EIC-3011 · 3 ·...
  • Page 11: Operating Instructions

    TAT 100%) 1.3 Operating Instructions 1.3.1 External Functions Front View Location Description USB2.0 External power LED1 HDD LED Business alarm LED VGA port System heart beat Self-defined LED External power LED2 Electric port/optical port expansion area · 4 · EIC-3011...
  • Page 12: Internal Layout

    Product Introduction Top view of the PC Location Description ALARM port Ground screw Power input connector 1.3.2 Internal Layout Internal Layout of the PC Location Description Power board Expansion board Motherboard EIC-3011 · 5 ·...
  • Page 13: Status Led

    This electric port expansion board provides one 1×2 network Bypass status LED, indicating Bypass status of the network: the upper yellow LED is Bypass LED, and the lower green LED is Normal1 LED. Descripton Yellow (upper) Bypass LED LED3 Green (lower) Normal LED · 6 · EIC-3011...
  • Page 14 SFP2. Their descriptions are as follows: Description Green (upper) ACTLED LED1/LED2 Green (lower) LILED Status description of LED is as follows: Network activity Network speed ACTLED LILED status status Data being Flash Connected transmitted No data being Not connected transmitted EIC-3011 · 7 ·...
  • Page 15: Application Scheme

    Under this circumstance, please make sure no water drop (condensation) is formed on the surface or interior of the device. If condensation is formed on the device, please wait for over twelve hours before connecting the device. · 8 · EIC-3011...
  • Page 16: Opening The Box And Initial Examination

    PC. Please do not rip them off. Serial number: located on the chassis body (as shown below) 2.4 External Environment Conditions The following conditions should be considered when planning the project:  The weather and mechanical environment conditions specified in the operation EIC-3011 · 9 ·...
  • Page 17 Please do not block the ventilation hole of the PC.  The installation position requirement for the PC should be always observed.  The connected or installed I/O should not generate reverse voltage of more than 0.5V inside the PC. · 10 · EIC-3011...
  • Page 18: Product Installation

    □Embedded Panel □Wall Mount □VESA Standard Arm □Portable ■Others DIN installation 3.2.1 DIN Installation Steps: As shown in the red arrow in the left picture, press the DIN buckle, until it clicks onto standard 35mmDIN guide rail. EIC-3011 · 11 ·...
  • Page 19: Application Environment Of Fully-Enclosed Computer

    6. The temperature of lower space (20~50mm from the bottom of the PC) should be no more than the rated operating environment temperature of the PC; 7. At any point in the heat exchange area, the air flow speed should not be lower than 0.2m/s. · 12 · EIC-3011...
  • Page 20 During the installation, the heat sink fin on the chassis should be in the same direction of ventilation inside the chassis to ensure better heat dissipation effect. Two ventilation methods are recommended, as shown in the Picture 3 and Picture 4. Figure 3 Left-right transverse ventilation EIC-3011 · 13 ·...
  • Page 21 Product Installation Figure 4 Upward ventilation · 14 · EIC-3011...
  • Page 22: Pc Connection

    PC or the central grounding busbar on the device. The minimum cross section area of the cable shall be no less than 2.5mm . The maximum ground resistance should be no more than 0.1Ω. EIC-3011 · 15 ·...
  • Page 23: Connecting The Device To Power

    Danger Disconnect the power source and data cable during a lightning storm. Attention The PC is completely isolated from the power supply only by disconnecting the power connector. · 16 · EIC-3011...
  • Page 24: Debugging

    It provides one RJ45 COM port which supports RS-232 mode. Its pin definition is as follows: Signal Name RTS# DTR# COM1 DSR# CTS# Note: TXD/RXD singal pins have surge protection function. 5.2.2 USB Port It provides two USB2.0 ports. Signal Name +5V_USB USB_Data- USB_Data+ USB1/USB2 EIC-3011 · 17 ·...
  • Page 25: Power Connector

    LED is “off”; when there are broadcasting packages, it is normal if the ACTLED is “flashing”. In addition: by configuring different network modules, this product supports expansion to two electric ports, two optical ports or four electric ports. · 18 · EIC-3011...
  • Page 26: Alarm Port

    30 VDC/1 A at 20°C (resistive load) 5.2.6 Display Port It provides one standard DB15 VGA port (optional). Its pin definition is as follows: Signal Name Signal Name Green Blue VGA1 (optional) DDCDATA HSYNC VSYNC DDCCLK EIC-3011 · 19 ·...
  • Page 27: Software Introduction

    Software Description Supported Range Name BIOS programming interface All the X86 motherboards and specification, which provides PCs of EVOC company unified interface for software to (products produced after access hardware. October 2011) A platform management All the motherboards/complete application software developed...
  • Page 28: Bpi Overview

    Software Introduction 6.1 BPI Overview EVOC BPI (BIOS Programming Interface) is a cross-platform, easy-to-maintain software interface specification, which supports access to hardware under the Protected Mode of 32-bit or 64-bit operating system and supports multi-process and multi-threading hardware access. BPI is a bridge between hardware and application software, and its purpose is to provide a unified standard interface for the application layer (in the form of library function, similar to library function of standard C).
  • Page 29 Security and High Reliability The BPI function library accessing the hardware is programmed by the motherboard developer and is strictly tested; therefore, it can avoid system malfunction caused by improper operation of the system hardware. · 22 · EIC-3011...
  • Page 30: Fmi Overview

    PC, total heart beat times of the CPU. eLog management information can provide valuable reference for failure analysis and product upgrade. BPI library address: please see “Software\Chinese\BPI” Or “Software\English\BPI” in the enclosed CD EIC-3011 · 23 ·...
  • Page 31: Emanager Software

    “Start”→“Program”→“EVOC” →“evoc_bpi_x”. 6.3 eManager Software eManager software is a device management platform software developed by EVOC. eManager software can be used for system operation abnormality monitoring, setup of GPIO input/output mode and electrical level, real-time monitoring of temperature, fan and voltage status.
  • Page 32: Function

    Watchdog. Exiting the program when Watchdog is counting down will also stop Watchdog. If “Automatically feed watchdog” option is selected, when the counted time is less than 3 seconds, Watchdog will be automatically fed. Function: Monitors whether the system can be normally operated, and carry out reset EIC-3011 · 25 ·...
  • Page 33 Software Introduction for abnormality. When abnormality occurs to the system, Watchdog cannot be fed automatically. After counting-down is finished, the system will restart, and recover from system error. 3. GPIO · 26 · EIC-3011...
  • Page 34 “Setup” button on the right. If it is a network-type motherboard, the special LED of the motherboard will also be displayed and can be set up. Function: Setup of GPIO and Network LED EIC-3011 · 27 ·...
  • Page 35: Firmware Management

    Method: After the software switches to hardware detection interface, it will automatically acquire temperature, fan speed, voltage and other information, refreshing at a 2S interval. Function: real-time acquisition of hardware operating status. 6.3.3 Firmware Management 1. HDD SMART · 28 · EIC-3011...
  • Page 36 HDD performance will be displayed in the list box. Function: To check SMART information related to HDD performance, which helps predict service life of HDD, and avoid data loss caused by damage to HDD. 2. Boot-up time EIC-3011 · 29 ·...
  • Page 37 The user can directly use eManager software for management of the device. If users intend to program software by themselves. Please refer to the complete routine of VB, VC, C++Builder, Delphi and BPI Programming Interface Operation Manual in the enclosed CD. · 30 · EIC-3011...
  • Page 38: Pc Maintenance

    7.1.2 Preventative Maintenance To maintain relatively high system availability, it is recommended to preventatively replace the quick-wear parts. The table below give the time interval for replacement: Assembly Time Interval for Replacement CMOS backup battery 5 years EIC-3011 · 31 ·...
  • Page 39: Replacing Backup Battery

    3. Disconnect the PC from power source. Replacing Battery Steps to replace battery Open the PC Remove the motherboard. Note: place the motherboard on a desktop with anti-electrostatic protection. Pull battery cablefrom motherboard BAT1 connector, remove the battery. · 32 · EIC-3011...
  • Page 40: Installing The Drivers

    PC will be lost. In this situation, reconfiguration of BIOS Setup is needed. 7.2 Installing the Drivers Regarding the installation of the driver program and the detailed information of the motherboard, please refer to the enclosed CD of the PC. EIC-3011 · 33 ·...
  • Page 41: Dimensions Drawing

    8. Dimensions Drawing 8.1 Dimensions Drawing Overview This section includes the following dimensions drawings: Product Outline Dimensions Drawing Note: The unit in the dimensions drawing is usually millimeter. 8.2 Product Outline Dimensions Drawing 62.8 109.6 Unit: mm · 34 · EIC-3011...
  • Page 42: Appendix

    2. Please check whether the Power cable or display display cable correctly cable is not connected connected with the display and the system unit. 3. Contact Technique Support if the screen remains black after implementing above measures. EIC-3011 · 35 ·...
  • Page 43 No system disk can The HDD power cable disk (the hard disk shall be found when or data cable is not installed with operating system powering on connected well bootable) well connected. · 36 · EIC-3011...
  • Page 44: Common Alarm Information Analysis And Solution

    Award BIOS motherboard. During Power The motherboard or complete PC is On Self Test (POST), the screen displays not connected to PS/2 or USB error information: “Keyboard error or no keyboard, and keyboard needs to be keyboard present”. connected properly. EIC-3011 · 37 ·...
  • Page 45: Esd Guideline

    ESD current may lead to potential problem of the module, or damage to the mo dule which is not serious for the momen t but may cause fault during operation. · 38 · EIC-3011...
  • Page 46 When holding the module, do not touch any chip pin or PCB circuit. In this way, the dissipated electricity will not affect the ESD-sensitive device Before handling the module, dissipate the electrostatic charges on your body. The EIC-3011 · 39 ·...
  • Page 47: Abbreviations

    A tool used to monitor and lower agement C power consumption. Automation System After-s ales Infor mation ASIS System Advanced Technology Adva nced Technolog Attachment Advanced Te chnology Extended American wire gauge An America standard to · 40 · EIC-3011...
  • Page 48 Canada or the two countr ies (using UL/USA) Clear to S Clear to Send Dynamic Rand om Access DRAM Memory Direct Current Direct Current Data Carrier Detect Data carrier signal detect Direct Memory Access Direct memory ac cess EIC-3011 · 41 ·...
  • Page 49 Industry Standar xtended ISA standard EISA Architec ture Expan ded Memory Man ager o manage expansion of memory Extended Memory 64 EM64T Technology European Norm EPROM/EEP Electrically Programmable sub-module Read -Only Mem ory/ EPROM/EEPROM chip · 42 · EIC-3011...
  • Page 50 HTML Language Internet page Data tr ansfer protocol on the HTTP Hypertext tr ansfer protoc Internet Hardware Hardware Input/Output Data input/out of the computer In tel(R) Application Accelerator Integrated Drive Electronics International EIC-3011 · 43 ·...
  • Page 51 Signaling Drive ia Access Con trol dia Access Control Memory card in credit card mory Card format achine-readable product MLFB designation Micro Memory Card 32*24.5mm format memory card Multiple Point In terface Used for Programming Devices · 44 · EIC-3011...
  • Page 52 Safety file system of Windows NTFS System ersion (2000, XP, Vista) Optical Disc Drive Standardized interface OLE for Process Control industrial process PATA Parallel ATA Personal PC Peripheral Component High-speed expansion bus Interconnect PCIe eripheral Componen High-speed serial, differential EIC-3011 · 45 ·...
  • Page 53 32 nodes Real Time Clock Real Time Clock Relia ble Transmis sion Request to send Service eceive Data Data transmission signal rial Advanced Technolog SATA Attachment Small Computer System SCSI Interface · 46 · EIC-3011...
  • Page 54 Cost of Owner ship in Film Transisto An LCD screen type Teletypewriter Asynchronous data transmission Transmit Data Data transmission signal Watchdog Time Monitoring time of Watchdog Underwriter Laboratories U.S. organization which Inc. carries out test a nd certification EIC-3011 · 47 ·...
  • Page 55 Simulated closed environment Virtualization Technolo can be used by using Intel technology To enable the function which ntel Virtualization irectly assigns the device (e.g. VT-D Technolog y for Directed I network adapter) virtual device. indows 200 · 48 · EIC-3011...
  • Page 56: Terminology Glossary

    The CF card socket is complian t with IDE port. CF card ca n be operated by connector and socket adapter, and other lectronic components on the PCMCIA or IDE HDD controller are not needed. There EIC-3011 · 49 ·...
  • Page 57 Wake-On- LAN (WoL) This function supports bootup of the PC via LAN port. LPT po LPT port (Centronics port) is a parallel port used to connect printer. · 50 · EIC-3011...
  • Page 58 It focuses on providing international standards for miniaturization and flexible use of device expansion card, so as to provide basic technology for the market. EG Port PCI Express used for graphics. A graphics port with 16 PCIe channels, used to expand graphics module. EIC-3011 · 51 ·...
  • Page 59 OM refers to Read-Only Memory. It can separately search each storage address. The program or d ata are permanently stored, so they will not be lost when power failure occurs. S.M.A.R.T Self-Monitoring, Analysis and Reporting Technology (SMART or S.M.A.R.T.) is an · 52 · EIC-3011...
  • Page 60 Wireless LAN is mainly used for portable PCs in offices or factory environment. Backup Copies of programs, data media o r database, use to keep or protect key, irreplaceable, data, and pr event data loss when damage to a working copy occurs. Some application EIC-3011 · 53 ·...
  • Page 61 Traditional drive can be used as USB device. Memory Card Memory card of credit-card format, the storage to store user programs and parameters (e.g. programmable module and CP). Reset Hardware reset: Using button/switch reset/reboot device. · 54 · EIC-3011...
  • Page 62 Logically, EFI is located under the operating sys tem, and is successive specification of device BIOS, mainly targeting 64-bit system. troller Controller in tegrating hardware and software to control certain internal or peripheral EIC-3011 · 55 ·...
  • Page 63 RAID1 system with SATA RAID controller (onboard or slot module) and at least two SATA detachable supports. The advantage of hotswap is that faulty hard drive can be replaced without having to reboot the PC. · 56 · EIC-3011...
  • Page 64 Warm boot the computer (Ctrl + Alt + Del) without disconnecting power source. otherboard Motherboard is the core part of a computer. Motherboard is used to process and store data, control and manage ports and device I/O. EIC-3011 · 57 ·...

Table of Contents