Power Connector; Lan Port - EVOC EIC-3011 User Manual

5.2.3 Power Connector

It provides two power input connectors.
PWR1/PWR2

5.2.4 LAN Port

It provides 10/100/1000Mbps network ports with two RJ45 connectors. The ports
have surge protection function.
ACTLED
(Single color:
green)
Flash
Off
Note: no matter the Gigabit LAN card contains Link signal or not, the ACTLED on
the left always indicates the data transmission status. When data is being transmitted,
the green LED on the left is "flashing"; when it is connected to network with no data
transmission, the green LED is "off"; when there are broadcasting packages, it is
normal if the ACTLED is "flashing".
In addition: by configuring different network modules, this product supports
expansion to two electric ports, two optical ports or four electric ports.
· 18 · EIC-3011
Pin
1
2
3
Network
activity
Data being
transmitted
No data being
transmitted
Signal Name
GND
NC
9V-36V
LAN1, LAN2
LILED
(dual-color: orange
and green)
Green
Orange
Off
Debugging
Network
speed
1000Mbps
100Mbps
10Mbps