Fmi Overview - EVOC EIC-3011 User Manual

Software Introduction
3) Easy Maintenance
Traditional WDT and GPIO programming are closely related to the hardware
with complicated test and debug process and software of different platforms;
however, the software developed by BPI only requires one set of the
maintenance software.
4) Low Cost
Developing the applications by BPI will not result in additional hardware and
software cost. Application software engineer can conveniently use BPI library
functions for second development, and do not need to pay attention to access
information of specific hardware. So it will greatly reduce the development
difficulty, shorten development cycle and boost time-to-market for the system
integrator.

6.2 FMI Overview

FMI (Firmware Management Interface) is management software developed based on
BPI specifications. Currently, FMI supports eLogo function. For its test program,
please refer to the eManager software in the user manual CD.
1) eLog
eLog keeps operation records of the PC in details, such as the time for first boot,
completion time of the test, date of production, time of each power-on/off, total
times of power-on of the system, times of illegal power-off, total online time
length of the PC, total heart beat times of the CPU. eLog management
information can provide valuable reference for failure analysis and product
upgrade.
BPI library address: please see "Software\Chinese\BPI"
Or "Software\English\BPI" in the enclosed CD
EIC-3011 · 23 ·