Display Irf Topology - H3C S5820X Series Irf Command Reference

Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display basic IRF settings.
<Sysname> display irf configuration
MemberID NewID
1
2
Table 2 Command output
Field
MemberID
NewID
IRF-Port1
IRF-Port2

display irf topology

Use display irf topology to display IRF fabric topology information.
The information includes the member IDs, IRF port state, and adjacencies of IRF ports.
Syntax
display irf topology [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
IRF-Port1
1 Ten-GigabitEthernet1/0/25
2 disable
Description
Current member ID.
Member ID that will take effect after a reboot.
Physical port or ports bound to IRF port 1. If no physical ports are bound to the
IRF port, this field displays disable.
Physical port or ports bound to IRF port 2. If no physical ports are bound to the
IRF port, this field displays disable.
IRF-Port2
disable
Ten-GigabitEthernet2/0/25
3