Display Irf Topology - H3C PSR150-A Command Reference Manual

Examples
# Display the pre-configurations of all members of the current IRF virtual device.
<Sysname> display irf configuration
MemberID NewID IRF-Port1
*2 2
+3 4
--------------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
Table 1-2 display irf configuration command output description
Field
Switch
NewID
Priority
IRF-Port1
IRF-Port2

display irf topology

Syntax
display irf topology
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display irf topology command to display topology information about the current IRF virtual
device.
The command displays all topology information learned by the current device.
Examples
# Display topology information about the current IRF virtual device.
Ten-GigabitEthernet2/0/28
Ten-GigabitEthernet3/0/25
Member ID
The ID with * indicates that the device is the master;
The ID with + indicates that it is the device that you are working on.
The member ID configured for a device after its reboot
The priority configured for a device after its reboot
Configuration of IRF–Port1. If it is displayed as multiple ports, it indicates that
the IRF port is aggregated from these physical IRF ports; If it is displayed as
disable, it indicates that the IRF port is not enabled.
Configuration of IRF–Port2. If it is displayed as multiple ports, it indicates that
the IRF port is aggregated from these physical IRF ports; If it is displayed as
disable, it indicates that the IRF port is not enabled.
IRF-Port2
Ten-GigabitEthernet2/0/26
Ten-GigabitEthernet3/0/27
Description
1-3