Irf Member Renumber - H3C S5820X Series Irf Command Reference

Syntax
irf member member-id priority priority
undo irf member member-id priority
Default
The priority of a member switch is 1.
Views
System view
Default command level
3: Manage level
Parameters
member-id: Specifies an IRF member ID.
priority: Sets priority in the range of 1 to 32. The greater the priority value, the higher the priority. A
member with higher priority is more likely to be the master.
Examples
Change the member priority assignment scheme in the IRF fabric so member 2 takes over as the master
at the next master election:
# Display IRF fabric information.
<Sysname> display irf
Switch
+1
2
*3
9
--------------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The Bridge MAC of the IRF is: 00e0-fc00-1000
Auto upgrade
Mac persistent
# Change the priority of the current master (member ID 3) to 16.
<Sysname> system-view
[Sysname] irf member 3 priority 16
# Change the priority of member 2 to 32.
<Sysname> system-view
[Sysname] irf member 2 priority 32

irf member renumber

Use irf member renumber to change the IRF member ID of a switch.
Use undo irf member renumber to set the IRF member ID of a switch to 1.
Syntax
irf member member-id renumber new-member-id
Role Priority
Slave 29
Slave 1
Master 32
Slave 30
CPU-Mac
00e0-fc00-1115
00e0-fc00-1615
00e0-fc00-1015
00e0-fc00-1515
: yes
: always
13