Cables Compatibility Tables - NRG Systems Hybrid XT Vane Product Manual

NRG Product Manual
Hybrid XT Vane

CABLES COMPATIBILITY TABLES

There have been several different versions of the Hybrid cable assembly since inception to accommodate various sensor
and turbine configurations. Please see the tables below to verify cable compatibility.
Hybrid Turbine Control Sensor Cables
Item Description
Number
4716 Assembly-Cable,600V, 10m, Connector, Power, Signal,
WithMountingBolt, Hybrid TCS
4717 Assembly-Cable,600V,20m, Connector,Power,Signal,
WithMountingBolt,Hybrid TCS
8797 Assembly-Cable,600V,12m,6 Pin
Connector,Power,Signal, WithMountingBolt,Hybrid TCS
9234 Assembly-Cable,300V,10m,
Connector,Power,Signal,WithMountingBolt,Hybrid TCS
9319 Assembly-Cable,300V,20m,
Connector,Power,Signal,WithMountingBolt,Hybrid TCS
HybridXT Turbine Control Sensor Cable Compatibility
Hybrid XT Turbine Control
4715 Sensor, Vane
Hybrid XT Turbine Control
4718 Sensor, Anemometer
Sensor-Hybrid XT Turbine
Control Sensor, Anemometer
6624 (calibrated)
Hybrid XT 4-20mA Output
5762 Turbine Control Sensor, Vane
Hybrid XT 4-20mA Output
Turbine Control Sensor,
5763 Anemometer
HybridXT_Vane_Manual
Rev 13.0
4716, 4717, 8797,
9234, 9319
4716, 4717, 8797,
9234, 9319
4716, 4717, 8797,
9234, 9319
4716, 4717, 8797,
9234, 9319
4716, 4717, 8797,
9234, 9319
support@nrgsystems.com | Page 9
Notes
10 m length, 5 pin cable, Green Tag
20 m length, 5 pin cable, Green Tag
12 m length, 6 pin cable, Red Tag
10 m length, 6-pin cable Orange Tag
20 m length, 6-pin cable Chartreuse Tag
Any cable may be used; if present, Yellow (Out
2) is not used and may be left disconnected
Any cable may be used; if present, Yellow (Out
2) is not used and may be left disconnected
Any cable may be used; if present, Yellow (Out
2) is not used and may be left disconnected
Any cable may be used; if present, Yellow (Out
2) is not used and may be left disconnected
Any cable may be used; if present, Yellow (Out
2) is not used and may be left disconnected
7 February 2017