Honda RS150R 2019 Owner's Manual page 93

4. Install a new bulb and parts in the reverse
order of removal.
u Install the socket by aligning its "
mark with the round projection on the
brake/tail light housing. Then turn it
clockwise until the "
aligned with the triangular projection
on the brake/tail light housing.
5. Close the seat.
❙
Rear Turn Signal Bulb
"
" mark is
1. Open the seat.
2. Turn the socket counterclockwise and pull
3. Pull the bulb out without turning it.
Electrical Trouble u Burned-out Light Bulb
Bulbs
Triangular
projection
" " mark
Round
projection
Sockets
P. 28
2
it out.
89