Honda RS150R 2019 Owner's Manual page 62

Engine Oil u Changing Engine Oil
Changing Engine Oil
Changing the oil requires special tools. We
recommend that you have your motorcycle
serviced by your dealer.
1. If the engine is cold, idle the engine for 3
to 5 minutes.
2. Turn the ignition switch off, stop the
engine and wait for 2 to 3 minutes.
3. Place your motorcycle on its centre stand
on a firm, level surface.
4. Place a drain pan under the drain bolt.
58
Drain bolt Sealing washer
5. Remove the oil fill cap/dipstick, drain bolt,
and sealing washer to drain the oil.
u Discard the oil at an approved recycling
centre.
6. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft).