Honda RS150R 2019 Owner's Manual page 87

Installation
1. Attach the side collars to the front wheel.
2. Position the front wheel between the
fork legs and insert the front axle shaft
from the right side, through the right
fork leg and wheel hub.
NOTICE
When installing the wheel, carefully fit the brake disc
between the pads to avoid scratching them.
3. Tighten the front axle nut.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft).
Tyre Puncture
4. After installing the wheel, apply the
brake lever several times, then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
u Removing Wheels
83