Sony DFP-D3000 Quick Start Manual page 89

1. Start-up Screen Menus
. File menu: Menu on file operations
. Config menu: DFP-D3000 connection and software setting menus
. Presets menu: DFP-D3000 preset function setting menus
. A-chain menu: DFP-D3000 AUX input, PEC input, MIC input, and Non-Sync input setting menus
. Tools menu: Menu of useful functions for DFP-D3000 settings
. Master menu: DFP-D3000 audio output and Lip Sync setting menus
. Test menu:
DFP-D3000 adjustment signal and check function menus
. Status screen: Displays the DFP-D3000 and film status
. Help menu:
DFP-D3000 setup software help menu
2. Details of settings at the Start-up screen
The following can be set at the start-up screen (B-chain adjustment screen)
. Room equalizer adjustment
Adjustment of room surround characteristics to optimum levels while observing the measuring
device (RTA, real time analyzer) used. The parametric equalizer is used for the subwoofer channel,
while the graphic equalizer is used for the other channels.
. Level adjustment of each channel
Corrects the differences in level caused by deviation of amplifier characteristics and deviation of
speaker characteristics.
The analog input level and SDDS input level can be set separately for the subwoofer channel only.
. Equalizer ON/OFF for each channel
The room equalizer can be turned ON/OFF by channel. This is effective regardless of the preset
setting.
. Mute ON/OFF setting by channel
. Mute ON/OFF setting of the master output
. Switching of room equalizer screen
DFP-3000
9-55