Sony DFP-D3000 Quick Start Manual page 20

5.5a Use the buttons to change the selected
parameter to slit loss (S_LOSS). Play a B&W Pink
Noise test film and use the Master Volume control
to adjust the slit loss frequency to achieve the
flattest response, as indicated by your RTA. The
result that is achievable depends on the slit height
and other properties of the reader and the actual
high frequency flatness of your pink noise test
film.
5.5b Use the buttons to return to the Left
optical input and use the Master Volume control to
adjust the slit loss compensation frequency to
achieve the flattest response.
This completes the A-Chain alignment procedure. To return to the main LCD menu, use the
buttons to select the EXIT option and press the SELECT button. You may also press any PRESET button
twice to exit all menus and return the Decoder to normal operation with that Preset selected and its
parameters loaded.
5-4
OPT1R GAIN: 2.4 dB
I S_LOSS 16.4kHz
L LC C RC R SW LS RS
OPT1L GAIN: 2.4 dB
I S_LOSS 16.4kHz
L LC C RC R SW LS RS
EXIT
MASTER VOLUME
SELECT
EXIT
MASTER VOLUME
SELECT
DFP-3000