Sony DFP-D3000 Quick Start Manual page 56

6. Using as the changeover system
When using the system combining the DFP-D3000 and CP-500 in the changeover format, it is necessary
to supply the motor start pulse and change over command signals for the CP-500 as well. Therefore, add
the following signals to the control signal line and connect the cables.
Projector
Signal
Projector 1 Motor Start
Projector 2 Motor Start
Picture Gate Select
Common
9-22
DFP-D3000 Automation I/O Connector
(D-sub Connector, 37pin, Female)
Pin No. Function
Pin 12 Motor 1
Pin 13 Motor 2
Pin 19 C/O command, tally
Pin 16 Tally Common
CP-500 Motor Start Connector
(D-sub Connector, 9pin, Female)
Pin No. Function
Pin 1 Motor Start Projector 1
Pin 9 Motor Start Projector 2
Pin 3 Change Over Relay
Pin 5 GND
DFP-3000