Table of Contents
Advertisement
If equalizer adjustments for B-chain have been performed on the CP-500, set the equalizer setting of the
corresponding preset (Preset 6) of the DFP-D3000 to "OFF". In the same way, if the Surround Delay is
set at the CP-500 side, set the DFP-D3000 Surround Delay to "OFF". The Preset Configuration screen of
the Setup software will display as follows. ((2) of the following diagram.)
Generally, as the equalizer and delay quality of the DFP-3000 are better than CP-500, use the DFP-3000.
The preset fallback setting corresponding to the CP-500 can be left at the default setting. (Because it is
fixed to prevent hardware fallback.)
9-21
DFP-3000
Hide quick links:
Advertisement
Table of Contents
