Flyability ELIOS 1 User Manual page 19

Both GCS will emit a beep.
On the Pilot GCS:
The Slave RC will appear in the Slave GCS List.
On the Camera Operator GCS:
Tap on "Request Permission", then tap OK when a pop-up window will be displayed.
On the Pilot GCS:
A window will be displayed confirming the control of the camera, tap on Agree.
If a Pilot GCS is turned into a CamOp GCS then the drone it was previously paired to will have to be re-paired
with the new Pilot GCS.
If the Pilot (Master) GCS is paired to a new drone then the Camera Operator (Slave) GCS will automatically
follow it.
ELIOS USER MANUAL
3 ELIOS System description
Page 19 of 38