Hamilton Jet HJ212 Installation And Service Manual page 194

CHANGE SUMMARY - REFER TO E.C.N. FOR DETAILS
REVISION: ECN: MATERIAL:
REFER TO SHEET 1 FOR AMENDMENTS
STANDARD:
MAT CERT REQ:
FINISHED WEIGHT:
ALL DIMENSIONS IN [mm] UNLESS OTHERWISE SPECIFIED
DESIGN CHECK: SIGN.
DRAWING REVISION: SIGN.
UNTOLERANCED DIMENSIONS & SURFACE FINISH
DOCUMENT CHECK: SIGN.
GENERAL:
ORIGINAL DESIGN: SIGN. MACHINED SURFACE FINISH:
This print is provided on a restricted basis and is not to be used
in any way detrimental to the interests of C. W. F. Hamilton and Co. Ltd
MANUFACTURING INFORMATION DRAWING INFORMATION
HJ IMPELLER BLADE DRESSING
INSTRUCTIONS AND BALANCING
TRACEABILITY REQ: INFORMATION
JET / CONTROL TYPE HJ
REMOVE ALL SHARP EDGES AND BURRS
DRAWN TO HAMJET 085195 PROJECTION:
SCALE: SHEET SIZE:
±0.5 HOLES: Ø0.2 ANGULAR: ± 0.5°
082206
DWG No:
Ra 6.3 μm
A3 Sht 5 of 5
L
REV: