Installation and Service Manual
Joint Lubrication
Impeller and coupling taper joints
Grease
Multi purpose lithium based grease or calcium sulphate based grease (apply a thin film of lubricant to the shaft taper).
Examples
BP:
Castrol:
Mobil:
Shell:
Steel to steel joints
Grease
Multi purpose lithium based grease or calcium sulphate based grease (apply a thin film of lubricant between mating faces).
Examples
BP:
Castrol:
Mobil:
Shell:
O-rings (Nitrile rubber only)
Grease
Multi purpose lithium based grease or calcium sulphate based grease (apply a thin film of lubricant to the o-ring).
Examples
BP:
Castrol:
Mobil:
Shell:
Do not apply grease to barrier cord o-rings.
Rotary water seal fitting
Lubricant
Only use (P80 temporary rubber assembly lubricant P/N 902021)
Do Not:
Or 20:1 detergent to water mix
Lubricate the seal faces
Use grease or oil
Energrease MP-MG2
Molub-Alloy 6040/150
Mobilux EP2
Gadus S2 V100
Energrease MP-MG2
Molub-Alloy 6040/150
Mobilux EP2
Gadus S2 V100
Energrease MP-MG2
Molub-Alloy 6040/150
Mobilux EP2
Gadus S2 V100
10-37
Appendix