Jet Systems Steering - Hamilton Jet HJ212 Installation And Service Manual

Appendix

Jet Systems Steering

Item Check
1 For jet units with tiller type steering check that the cotter pins (tapered pins which locate the
tiller arms on the steering shaft) are facing the correct direction for the deadrise angle and the
number of jets (refer to the steering drawings in the product manual).
2 For manual hydraulic helms ensure that:-
Correct steering ratio (1 to 2 turns of helm from lock to lock).

Full lock travel is limited by the cylinder, not the steering linkage.

Steering sense is correct (i.e. port helm provides port nozzle movement).

Ensure that all air has been bled from the steering system (feel at the wheel will be soft and
spongy if there is still air in the steering system).
Notes:
10-16
Installation and Service Manual
Completed

