Drive Shaft - Hamilton Jet HJ212 Installation And Service Manual

Installation and Service Manual

Drive Shaft

Item Check
1 Ensure driveline details have been approved by CWF Hamilton & Co Ltd.
2 On universal joint driveshafts (refer to the design basics section in the
product manual) check:
Yoke offset angles are in the same plane, are equal and are less than 5º.

Yokes are in the same plane.

3 On bearing supported line shafts (refer to the design basics section in the
product manual) check:
 The support bearings are aligned with the engine flywheel.
Outer support bearings are close to the end of the couplings.

Notes:
10-17
Appendix
Completed


