Table of Contents
Advertisement
Trouble or fault
The tool can't be switched
on.
Individual laser beams don't
function.
The tool can be switched on
but no laser beam is visible.
Automatic leveling doesn't
work.
9
Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
10
Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
11
FCC statement (applicable in US) / IC statement (applicable in Canada)
This device complies with Part 15 of the FCC Rules and CAN ICES-3 (B) / NMB-3 (B). Operation is subject
to the following two conditions:
1. This device shall cause no harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by Hilti may restrict the user's authorization to
operate the equipment.
14
English
Printed: 08.05.2019 | Doc-Nr: PUB / 5492798 / 000 / 00
Possible cause
Device or selector switch faulty.
The laser source or laser control
unit is faulty.
The laser source or laser control
unit is faulty.
The temperature is too high or too
low.
The tool is standing on an exces-
sively inclined surface.
Selector switch in the
position.
The inclination sensor is faulty.
Action to be taken
▶ Have the tool repaired by Hilti
Service.
▶ Have the tool repaired by Hilti
Service.
▶ Have the tool repaired by Hilti
Service.
▶ Allow the tool to cool down or
warm up.
▶ Set the device on a flat,
horizontal surface.
▶ Set the selector switch to the
position.
▶ Have the tool repaired by Hilti
Service.
Hide quick links:
Advertisement
Table of Contents
