Before Voice Dialing - Sony Ericsson Z502a User Manual

Calling

Before voice dialing

You must first activate the voice dialing function
and record your voice commands. An icon appears
next to a phone number that has a voice command.
To activate voice dialing and record
names
1
} Settings }
the
} Voice Dialing } Activate } Yes
a contact.
2
If the contact has more than one number, use
and to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record
a voice command such as "John mobile" for
the phone number you selected.
3
Instructions appear. Lift the phone to your ear,
wait for the tone and say the command that
you want to record. The voice command is
played back to you.
4
If the recording sounds ok
and repeat step 3.
5
To record another voice command for a contact
Edit Names } New Voice Cmd.
steps 2-5 above.
30
This is the Internet version of the user's guide. © Print only for private use.
General } Voice Control
tab
and select
} Yes. If not } No
again and repeat
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name On or Off
} Settings }
the General
} Play Caller Name.
Voice dialing
You can voice dial by saying a pre-recorded voice
command. Start voice dialing from standby using
the phone, a portable handsfree, or by saying your
magic word.
To make a call from the phone
1
From standby, press and hold one of the
volume buttons.
2
Lift the phone to your ear, wait for the tone and
say the name you recorded earlier, for example
"John mobile". The name is played back to you
and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button.
} Voice Control
tab