Before Voice Dialing - Sony Ericsson Z500 Series User Manual

Calling
recording, make sure that you are in a quiet
environment and try to use names that are distinct
%
from each other
using voice commands.

Before voice dialing

You must first activate the voice dialing function
and record your voice commands. An icon appears
next to a phone number that has a voice command.
To activate voice dialing and
record names
1
} Settings }
the
} Voice Dialing } Activate } Yes
a contact.
2
If the contact has more than one number,
use and
phone number to which you want to add the
voice command. Now you are going to record
a voice command such as "John mobile" for
the phone number you selected.
3
Instructions appear. Lift the phone to your ear,
wait for the tone and say the command that
you want to record. The voice command is
played back to you.
30
This is the Internet version of the user's guide. © Print only for private use.
32 Tips when recording and
General } Voice Control
tab
and select
to view the numbers. Select the
4
If the recording sounds ok
and repeat step 3.
5
To record another voice command for a contact
Edit Names } New Voice Cmd.
steps 2-5 above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name On or Off
} Settings } General
the
} Play Caller Name.
Voice dialing
You can voice dial by saying a pre-recorded voice
command. Start voice dialing from standby using
the phone, a portable handsfree, or by saying your
magic word.
} } No
Yes. If not
again and repeat
} Voice Control
tab