Before Voice Dialing - Sony Ericsson K500 User Manual

Before Voice Dialing

You must first activate the voice dialing function and
record your voice commands. An icon appears next
to a phone number that has a voice command.
Turn the Media player off before using voice dialing.
Scroll to the Media player and press
To activate voice dialing and record
names
1
} Settings } General
the
} Voice Dialing } Activate } Yes } New Voice
Cmd.
and select a contact.
2
If the contact has more than one number, use
and to view the numbers. Select the phone
number to which you want to add the voice
command. Now you are going to record a voice
command such as "John mobile" for the phone
number you selected.
3
Instructions appear. Lift the phone to your ear,
wait for the tone and say the command that you
want to record. The voice command is played
back to you.
4
If the recording sounds ok
and repeat step 3.
5
To record another voice command for a contact
} Edit Names } New Voice Cmd.
repeat steps 2-5 above.
This is the Internet version of the user's guide. © Print only for private use.
to turn off.
} Voice Control
tab
} Yes. If not } No
again and
Caller Name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name On or Off
} Settings } General
the
} Play Caller Name.
Voice Dialing
You can voice dial by saying a pre-recorded voice
command. Start voice dialing from standby using
the phone, a portable handsfree, or by saying your
magic word.
To make a call from the phone
1
From standby, press and hold one of the volume
buttons.
2
Lift the phone to your ear, wait for the tone and
say the name you recorded earlier, for example
"John mobile". The name is played back to you
and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button.
Calling
} Voice Control
tab
25