Table of Contents
Advertisement
Draft for Sony Ericsson -- Preliminary Copy
Voice Activated Dialing
Before using Voice Activated Dialing, you must add
voice tags to your phonebook contacts. The
commands, such as Call, are prerecorded in English,
but you can re-record these commands if you wish. See
"Training Commands" on page 52.
1 Activate voice dialing using one of these methods:
• Say your Magic Word
• Press and hold a side volume key
• Press and hold the handsfree button (when using
handsfree)
2 When prompted, say a command, such as "call".
3 Wait for the beep. Now say the name of the contact
you want to call.
4 The phone will say "Calling Bob". If there are
multiple numbers for that name, you will be
prompted to say the number type.
Voice Digit Dialing
It is possible to dial a phone number by speaking the
digits with a short pause between each digit. Each digit
already has an associated voice command in English,
Using Voice Control
56
but you can re-record these commands if you wish.
See "Training Commands" on page 52.
1 Activate voice dialing using one of these methods:
• Say your Magic Word.
• Press and hold a side volume key.
• Press and hold the handsfree button (when using
handsfree).
2 When prompted, say "dial" and the digits for the
number you want to call. The phone will repeat
each number with either a Number Echo or Tone.
3 Say "call" to begin dialing.
Note: Say "clear" to clear a single digit. If you say clear two
times in a row, you will be asked if you want to clear
the entire number.
Note: Say "verify" to hear all numbers played back to you.
Digit Feedback
When you are using Voice Digit Dialing, your phone
will respond to indicate that it understood your
command. Settings include
Echo feedback will echo the accepted digit while tone
and
.
Number Echo
Tone
Advertisement
Table of Contents
