Product Overview; Specifications; Attachments/Accessories; Before Operation - Toro 44536 Operator's Manual

Product Overview

Specifications

Note:
Specifications and design are subject to
change without notice.
Length
Width
Height
Net weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
125 cm (49 inches)
150 cm (59 inches)
117 cm (46 inches)
227 kg (500 lbs)
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Always shut off the traction unit engine, remove
the key, wait for all moving parts to stop, and allow
the machine to cool before adjusting, repairing,
cleaning, or storing the machine. Know how to
stop the machine and shut off the engine quickly.
•
Keep all guards, safety devices, and decals in
place. Repair or replace all safety devices and
replace all illegible or missing decals. Do not
operate the machine unless they are present and
functioning properly.
•
Each time an attachment or implement is mounted,
check the 3-point-hitch movement. Ensure that
there is no interference with hoses and attachment
parts when operating the 3–point hitch.
Important:
You can damage the PTO shaft
if you operate attachments at too high of an
angle.
•
Attachments can change the stability and the
operating characteristics of the traction unit.
•
Locate the pinch point areas marked on the
traction unit and attachments and keep your hands
and feet away from these areas.
•
Ensure that the traction unit is suitable for use with
an implement of this weight by checking with the
traction unit supplier or manufacturer.
•
Do not modify this equipment in any manner.
10