Related Manuals for Toro PowerPlex Series
Summary of Contents for Toro PowerPlex Series
- Page 1 Form No. 3418-129 Rev C PowerPlex ™ 40V MAX Axial Blower Model No. 51134—Serial No. 318000001 and Up Model No. 51134T—Serial No. 318000001 and Up *3418-129* C Register at www.Toro.com. Original Instructions (EN)
- Page 2 You are responsible for operating the product properly and safely. Save all warnings and instructions for future You may contact Toro directly at www.Toro.com for reference. product and accessory information, help finding a The term “power tool” in all the warnings refers...
- Page 3 Use only the following type and size Do not use the power tool if the switch battery(ies): Toro battery Model 88525 or does not turn it on and off. Any power tool 88526. that cannot be controlled with the switch is Remove or disconnect the battery before dangerous and must be repaired.
-
Page 4: Sound Pressure
Sound Pressure This unit has a sound pressure level at the operator’s ear of 81.3 dBA, with an Uncertainty Value (K) of 3 dBA. The sound pressure level was determined according to the procedures outlined in EN ISO 11201. Sound Power This unit has a guaranteed sound power level of 96 dBA, which includes an Uncertainty Value (K) of 3 dBA. -
Page 5: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal136-2493 136-2493 1. Do not discard. decal136-2494 136-2494 decal136-2501 1. - Page 6 decal136-2534 136-2534 1. The battery does not 4. Stop—follow these decal136-2537 136-2537 come out of the box fully instructions before first charged. use. 1. Warning—read the Operator’s Manual; wear hearing 2. Place the battery in the 5. Read the Operator’s protection;...
-
Page 7: Assembling The Blower
Setup Note: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, Assembling the Blower refer to Charging the Battery Pack (page Parts needed for this procedure: Blower tube Mounting the Battery Procedure Charger (Optional) Slide the blower tube onto the blower housing. -
Page 8: Product Overview
Product Overview Operation Specifications WARNING The blower can throw debris, possibly causing Weights serious personal injury to the operator or Mass of the machine without 2.8 kg (6.2 lb) bystanders. the battery • Do not blow hard objects such as nails, Mass of the machine with 3.8 kg (8.4 lb) bolts, or rocks. - Page 9 Using the Attachments To adjust the air speed as you blow, use the variable-speed trigger (Figure Use the provided attachments as needed. To maintain the current air speed, engage the speed Note: The Gutter Cleaner Kit (Model 51667) and lock (Figure Oscillating Tube (Model 51764) are sold separately.
- Page 10 (US and Canada only). Left Light Right Light Indicates: If you are located outside of the US and Canada, please contact your authorized Toro Charger is on; no battery distributor. pack inserted Battery pack is charging Green...
-
Page 11: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The battery pack loses charge quickly. - Page 12 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company.