–
Clean the thread of the wheel spindle and screw
–
Grease wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Position wheel speed sensor
–
Position reflector.
–
Mount and tighten screw
Guideline
Screw, wheel speed
sensor holder
–
Mount and tighten screws
E00668-10
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
–
Take the motorcycle off the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 100)
WHEELS, TIRES 14
3
p. 241)
3
.
M8
26 Nm (19.2 lbf ft)
4
in the hole.
5
.
M6
8 Nm (5.9 lbf ft)
6
.
p. 103)
.
149