Command Manual – Link Aggregation
H3C S7500 Series Ethernet Switches
Chapter 1 Link Aggregation Configuration
1.1 Link Aggregation Configuration Commands
1.1.1 display lacp system-id
Syntax
display lacp system-id
View
Any view
Parameters
None
Description
Use the display lacp system-id command to display the device ID of the local system,
including the system priority and the MAC address.
Examples
# Display the device ID of the local system.
<H3C> display lacp system-id
Actor System ID: 0x8000, 000f-e20f-0100
Table 1-1 Description on the fields of the display lacp system-id command
Actor System ID
1.1.2 display link-aggregation interface
Syntax
display link-aggregation interface interface-type interface-number [ to interface-type
interface-number ]
Commands
Field
Device ID of the local system, including the system
priority and the system MAC address
Chapter 1 Link Aggregation Configuration
Description
1-1
Commands