Elation Proteus Smarty Hybrid User Manual page 37

S Y S T E M M E N U
EDIT PROGRAM – Record Controller – Working with Built-In Program [continued]
To start an Auto Program, proceed as follows:
1. Slave Setting
Select "Function Mode".
Press ENTER to confirm.
Select "Set to Slave".
Press ENTER to confirm.
Select "Slave 1", "Slave 2" or "Slave 3".
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
2. Automatic Program Run
Select "Function Mode".
Press ENTER to confirm.
Select "Auto Program".
Press ENTER to confirm.
Select "Master" or "Alone".
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
3. Program Selection for Auto Pro Part
Select "Edit Program".
Press ENTER to confirm.
Select "Select Programs".
Press ENTER to confirm.
Select "Auto Pro Part 1", "Auto Pro Part 2" or "Auto Pro Part 3" and select which Slave
program is to be sent. Selection "Part 1" means, that the Slave unit runs the same
program as the master units.
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
4. Program Selection for Edit Program
Select "Edit Program".
Press ENTER to confirm.
Select "Edit Program".
Press ENTER to confirm.
Select the desired program to edit specific scenes into a specific program.
Press ENTER to confirm.
Press MODE/ESC in order to return to the main menu.
37