Elation Proteus Smarty Hybrid User Manual page 25

L A M P I N S T A L L A T I O N [continued]
T O R Q U E S E T T I N G S
HEATSINK MODULE SCREWS MUST BE TIGHTENED WITH A TORQUE WRENCH.
The (4x) hex-head screws holding the heatsink module MUST be tightened with a torque wrench (not included).
11 lbf-in. (12.7kgf-cm) *
TORQUE SETTING =
* lbf-in = Pound Force Inches | kgf-cm = Kilogram Force Centimeters
CAUTION! DO NOT OVER TORQUE SCREWS AS THIS CAN CAUSE LEAKAGE ISSUES!
TO CONFIRM THE IP65 INTEGRITY AFTER A LAMP REPLACEMENT, TEST FIXTURE USING THE ELATION
IP TESTER. CONTACT ELATION SERVICE FOR MORE DETAILS.
F O R S C R E W S
25