Elation Proteus Smarty Hybrid User Manual page 17

G O B O I N S T A L L A T I O N [continued]
10. REPLACING A ROTATING GOBO
Carefully lift the GOBO Holder up and out from the GOBO Wheel using small needle nose plyers.
Take care not to scratch the GOBO and GOBO Holder when removing it from the GOBO Wheel Module.
11. Locate the tab of the retaining spring. Using a precision pick (or similar tool), carefully press the retaining spring
inward to relieve the tension. Remove the retaining spring and carefully separate the GOBO from the GOBO Holder.
Install the replacement GOBO following the steps above in reverse order.
CAUTION: TAKE CARE NOT TO SCRATCH GOBO OR GOBO HOLDER
17