Elation Proteus Smarty Hybrid User Manual page 19

G O B O I N S T A L L A T I O N [continued]
TORQUE SETTINGS FOR PANEL SCREWS
PANEL SCREWS MUST BE TIGHTED WITH A TORQUE WRENCH!
The (12x) hex-head screws holding the panels MUST be tightened with a torque wrench (not included).
TORQUE SETTING = 11 lbf-in. (12.7kgf-cm) *
* lbf-in = Pound Force Inches | kgf-cm = Kilogram Force Centimeters
CAUTION! DO NOT OVER TORQUE SCREWS AS THIS CAN CAUSE LEAKAGE ISSUES!
TO CONFIRM THE IP65 INTEGRITY AFTER A GOBO REPLACEMENT, TEST FIXTURE USING
THE ELATION IP TESTER. CONTACT ELATION SERVICE FOR MORE DETAILS
.
19