Unitech MS280 Quick Start Manual

Reading Mode

Continuous Mode
LED is always on.
The trigger does not function in
Continuous Mode.
Toggle Mode
The LED is always on when the trigger
is pressed.
The LED will go o if one bar code is read.
Factory Default
Write to
Custom Defaults
Keyboard Layout
US English*
Spanish
German
Hungarian (Qwertz)
Japanese (106 Key)
Canadian (French) Canadian (Traditional)
* ：Default Option
For more detailed scanner setting, please go to www.ute.com to download the user manual and the
scanner configuration manager utility.

Connecting the Scanner

Connect USB cable to the USB port of a host PC.
Flash Mode
The LED is on steady if a bar code is
close to the scanner, but starts ashing
if no bar code is detected after 60
seconds.
The trigger does not function in Flash
Mode.
Prefix and Suffix
Clear pre/ postamble
Preamble
UK English
Slovak
Swedish
Hungarian (101 key)
Belgian
MS280
Trigger Mode*
The LED will light when the trigger is
pressed.
The LED will go o when the trigger is
released.
Test Mode
Factory Scanability Test Use Only
Example:
Set PREAMBLE String as " ## "
POSTAMBLE String as " $$ "
Setting Procedure:
Step 1 : Scan : CLEAR PRE/ POSTAMBLE.
Step 2 : Scan : PREAMBLE.
Postamble
Step 3 : Scan : " # " twice from FULL ASCII Table.
Step 4 : Scan : PREAMBLE.
Step 5 : Scan : POSTAMBLE.
Step 6 : Scan : " $ " twice from FULL ASCII Table.
Step 7 : Scan : POSTAMBLE.
*Please download user's manual from unitech website for FULL ASCII Table.
Data Format:
[Preamble] [Symbology ID] [Barcode Length] [Barcode Data]
Italian Swiss (German)
Brazilian ( Portuguese )
Danish
Portuguese
CZECH (Qwertz)
CCD Barcode Scanner
Quick Start Guide
Continuous Auto Off
The LED is always on when the trigger
is pressed.
The LED will go o if no bar code has
been detected after 60 seconds.
Notes:
1. A PREAMBLE is a string of up to
16 characters added to the beginning
of a scanned barcode.
2. A POSTAMBLE is a string of up to
16 characters added to the end of a
scanned barcode.
3. Default value for both: None.
[Postamble] [Terminator]
Swiss (French)
French Norwegian
ALT Code
Dutch
CZECH (Qwerty)
Version 1.0
401371G