Fastech Ezi-Servo Plus R User Manual page 7

Notes on Installation
1) This product has been designed for indoor uses. The ambient temperature of the room
should be 0℃~55℃.
2) If the temperature of the case is 50℃ or higher, radiate heat outside to cool down.
3) Do not install
objects.
4) If more than 2 drives are installed in a line, keep the interval of 20mm or more
vertically and 50mm or more horizontally at least.
this product under direct rays or near magnetic or radioactive
www.fastech.co.kr
1. Safety Pre-cautions 7