Replacing The Spherical Bearing - DT SWISS R 535 ONE Technical Manual

5. REPLACING THE SPHERICAL BEARING

Required Material
spherical bearing complete
tool kit spherical bearings
cleaner/degreaser
thread locker
5.1 CHECKING THE SPHERICAL BEARINGS
1. Check the play of the spherical bearing by hand.
→ If the spherical bearing can be moved without resistance, the spherical bearing should be replaced.
5.2 REPLACING THE SPHERICAL BEARING
1. Put the pin of the disassembly tool from one side
into the spherical bearing.
2. Push the counter sleeve of the disassembly tool on
the other side of the spherical bearing onto the pin
of the disassembly tool.
3. Press out the spherical bearing by compressing the
disassembly tool.
→ A vice, a hand press or the like can be used for
pressing.
4. Degrease the shock eye and apply high-strength
threadlocker to the inner surface of the shock eye.
28
Specification
CWDXXXXN08079S
Motorex Rex, Motorex Swissclean, Motorex OPAL 2400,
OPAL 3000, OPAL 5000
high-strength
R 535 ONE Technical Manual - REPLACING THE SPHERICAL BEARING
CWTXXXXX12696
Quantity
as required
1
as required
as required
threadlocker