Honda 175 1971 Owner's Manual page 30

ght Bulb Re placement
:ive the head light rim from the
light case after removing the two
nt i ng scr ews.
:>ve the two lock pins
CD,
and un-
v @ and adjusti ng screw @ .
:ive the sealed beam unit
©
from
1ea dl ight r im.
pins
screws
@ Adjus ting scr cw
©
Scaled bcam unit
Tail / Stoplight Bulb Re placement
1. Remove the tai l/stoplight lens r eta ining
screw.
2. Press the bulb
CD
inward
®
an d t w ist
to the l eft @, and r emove the bulb © .
3. Replace with a new bu lb.
4. When insta llin g the tai lli ght l ens, do
not overtighten the screws, as this may
damage the lens.
Q) Tail/stopli ght bulb
Turn Signal Bulb Replacement
Bu lb rep l aceme nt is performed i n the same
manner as for the tai l/ stoplight bulb in
the paragraph above.
lllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllL
T 0 0 L
I he too l kit
CD
is loca ted in t he com p ar t-
ment i n the center of the motorcycle
direc tly behind the engine. Minor adjust-
ment and par ts rep lacement can be per-
formed with the tools contained in the
k it.
Adjustments or r epa irs which cannot
be performed wi t h the tools in the k it
~h ould
be performed by your HONDA
dea ler.
Q)
Tool k it
:
-
-
KIT
111111111111111111111111111111111111111111111111111 1111111111111111111111111111111111111111 11111111111
.
The tool ki t includ es the i tems listed
be low :
CD
Pliers
@ Bx 12 mm open end wrench
@ 10 x 14 mm open end w rench
©
17 x 19 mm open end wrench
@
Axle \vrench ;
®
Axle wrench holder
CV
Spark plug w r ench
®
No. 2 screwdrive r
®
No. 3 Phillips scr ewdriver
@)
No. 2 Phillips screwdriver
@ Screwdriver handle: for scr ewdr iver
@ Lever: for screwdriver
@ Valve tappet adjusting w r ench: for
adjustment of va lve tappet c learance
@ Clearance gauge: for adjustment of
va lve te!ppe t clearance
@ 45 mm pi n wrench: for adjus tment of
rear shock absorber
@ Tool bag
Items attached to the motorcycle in a
separa te package
CD
A can of touch- up pa int
@ Spare battery fuse
53