1. Manuals
  2. Brands
  3. ICON Health & Fitness Manuals
  4. Elliptical Trainer
  5. UMI WELLNESSFIT E
  6. User manual

ICON Health & Fitness UMI WELLNESSFIT E User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Model No. AMIEL19917.0
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal
CUSTOMER SERVICE
UNITED KINGDOM
Call: 0330 123 1045
Mon. to Fri. 9 am to 7 pm
Sat. 9 am to 12 pm
From Ireland: 053 92 36102
Website: iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 4, Westgate Court
Silkwood Park
OSSETT
WF5 9TT
UNITED KINGDOM
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for ICON Health & Fitness UMI WELLNESSFIT E

Summary of Contents for ICON Health & Fitness UMI WELLNESSFIT E

  • Page 1 Model No. AMIEL19917.0 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 Mon. to Fri. 9 am to 7 pm Sat. 9 am to 12 pm From Ireland: 053 92 36102 Website: iconsupport.eu E-mail: csuk@iconeurope.com...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . .2 IMPORTANT PRECAUTIONS .

  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the revolutionary UMI reading this manual, please see the front cover of this ® WELLNESSFIT E elliptical. The WELLNESSFIT E manual. To help us assist you, note the product model elliptical provides an impressive selection of features number and serial number before contacting us.

  • Page 5: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.

  • Page 6: Assembly

    ASSEMBLY • Assembly requires two persons. In addition to the included tool(s), assembly requires the following tools: • Place all parts in a cleared area and remove the one Phillips screwdriver packing materials. Do not dispose of the packing materials until you finish all assembly steps. one adjustable wrench •...
  • Page 7 3. Attach the Front Stabilizer (3) to the Frame (1) with two M8 x 65mm Carriage Bolts (73), two M8 Curved Washers (65), and two M8 Acorn Nuts (82); start both Carriage Bolts, and then tighten the Acorn Nuts. 4. While a second person holds the Upright (2) near the Frame (1), connect the Upright Wire (49) to the Frame Wire (68).
  • Page 8 5. Insert the excess wire into the Frame (1). Tip: Avoid pinching the wires. Slide the Upright (2) onto the Frame (1). Attach the Upright (2) with two M8 x 65mm Bolts (75), four M8 Curved Washers (65), two M8 Split Washers (90), and two M8 Locknuts (84);...
  • Page 9 7. Attach the Water Bottle Holder (41) to the Upright (2) with two M4 x 16mm Flange Screws (95); start both Flange Screws, and then tighten them. 8. Identify the Right Lower Arm (11). Using a plastic bag to keep your fingers clean, apply a generous amount of the included grease to the right axle on the Upright (2).
  • Page 10 9. Identify the Right Upper Arm (13) and orient it as shown. Then, slide the Right Upper Arm onto the Right Lower Arm (11). Attach the Right Upper Arm (13) with two M8 x 16mm Screws (74), two M8 Split Washers (90), and two M8 Curved Washers (65);...
  • Page 11 11. Orient the Right Pedal (33) as shown, and attach it to the Right Pedal Arm (15) with two M10 x 45mm Bolts (76), two M10 Washers (72), and two M10 Locknuts (83); start both Bolts, and then tighten the Locknuts. Attach the Left Pedal (32) to the Left Pedal Arm (14) in the same way.
  • Page 12 13. While a second person holds the Console (5) near the Upright (2), connect the wire (C) on the Console to the Upright Wire (49). Insert the excess wire into the Upright. Tip: Avoid pinching the wires. Attach the Console (5) to the Upright (2) with two M5 x 12mm Screws (80);...

  • Page 13: How To Use The Elliptical

    HOW TO USE THE ELLIPTICAL HOW TO MOVE THE ELLIPTICAL HOW TO USE THE ELLIPTICAL Stand in front of the elliptical, hold the upright (A), and To mount the elliptical, hold the upper arms (D) or the place one foot against one of the transport wheels (B). handlebars (E) and step onto the pedal (F) that is in Pull on the upright and have a second person lift the the lower position.
  • Page 14 HOW TO LEVEL THE ELLIPTICAL If the elliptical rocks slightly on your floor during use, turn one or both of the leveling caps (H) on the rear sta- bilizer until the rocking motion is eliminated.

  • Page 15: How To Use The Console

    HOW TO USE THE CONSOLE CONSOLE DIAGRAM DOWN—Selects or decreases the values of PROGRAMS, TIME, DISTANCE, TARGET HEART RATE, AGE, and 10 columns. START/STOP— Starts or stops the program chosen. ABOUT THE DISPLAY START—Indicates the program selected has started. STOP—Indicates the program selected has stopped. Users are free to change the programs and the value of functions.
  • Page 16 PROGRAM OPERATION Measure your heart rate if desired. 1. Select a program using the UP or DOWN keys and Note: If there are then press the ENTER key to select. sheets of plastic on the metal contacts (A) of the handgrip Manual = P1 Preset Programs = P2-P13 (see profiles below) heart rate monitor,...

  • Page 17: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING MAINTENANCE HOW TO ADJUST THE REED SWITCH Regular maintenance is important for optimal If the console does not display correct feedback, the performance and to reduce wear. Inspect and properly reed switch should be adjusted. tighten all parts each time the elliptical is used. Replace any worn parts immediately.
  • Page 18 HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is at the highest level, the drive belt may need to be adjusted. See assembly step 10 on page 10. Remove the Right Arm Bracket (88) from the right arm of the Crank (18).

  • Page 19: Exercise Guidelines

    EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exercise Before beginning this at a low intensity level for a sustained period of time. or any exercise program, consult your physi- During the first few minutes of exercise, your body uses cian.

  • Page 20: Part List

    PART LIST Model No. AMIEL19917.0 R0918A Key No. Qty. Description Key No. Qty. Description Frame M4 x 20mm Screw Upright M6 x 100mm Bolt Front Stabilizer M8 x 60mm Bolt Rear Stabilizer M8 x 16mm Hex Bolt Console M6 Nut Handlebar Pivot Wave Washer Reed Switch/Wire...

  • Page 21: Exploded Drawing

    EXPLODED DRAWING A Model No. AMIEL19917.0 R0918A...
  • Page 22 EXPLODED DRAWING B Model No. AMIEL19917.0 R0918A...

  • Page 23: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

Table of Contents