Table of Contents
Advertisement
Quick Links
proform.com
Model No. PFEL09716.2
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to my.proform.com.
CUSTOMER CARE
For service at any time, go to
proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness PFEL09716.2
Summary of Contents for ICON Health & Fitness PFEL09716.2
- Page 1 USER’S MANUAL Model No. PFEL09716.2 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com.
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 4 18. The heart rate monitor is not a medical 20. Keep your back straight while using the device. Various factors may affect the accu- elliptical; do not arch your back. racy of heart rate readings. The heart rate monitor is intended only as an exercise aid 21.
- Page 5 STANDARD SERVICE PLANS...
-
Page 6: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM reading this manual, please see the front cover of this ® SMART STRIDER 8.0 elliptical. The SMART STRIDER manual. To help us assist you, note the product model 8.0 elliptical provides an impressive selection of fea- number and serial number before contacting us. -
Page 7: Assembly
ASSEMBLY • To hire an authorized service technician to • In addition to the included tool(s), assembly assemble this product, call 1-800-445-2480. requires the following tool(s): one Phillips screwdriver • Assembly requires two persons. Assembly may be easier if you have a set of •... - Page 8 3. If there are shipping supports (not shown) attached to the front of the Frame (1), remove the screws from the shipping supports, and dis- card the screws and the shipping supports. With the help of another person, place some packing inserts from the packing material under the Frame (1) so that the Frame is lifted off the floor.
- Page 9 5. Rotate the Right Upper Body Arm (9) to the position shown. Attach the Right Upper Body Arm (9) to the Right Upper Body Leg (6) with an M10 x 50mm Screw (95). IMPORTANT: Tighten the indicated M10 x 45mm Hex Screw (78). Then, press the Upper Body Arm Cover (20) downward and turn it so that it is flush with the Right Leg Front and Rear Covers (11, 15).
-
Page 10: The Chest Heart Rate Monitor
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR • Store the heart rate monitor in a warm, dry place. Do not store the heart rate monitor in a plastic bag or If the heart rate monitor looks like the one shown in other container that may trap moisture. -
Page 11: How To Use The Elliptical
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may 2-pole Receptacle This product must be grounded. If it should mal- be used to function or break down, grounding provides a path of connect the Adapter least resistance for electric current to reduce the risk power cord... - Page 12 HOW TO MOVE THE ELLIPTICAL HOW TO ADJUST THE POSITIONS OF THE PEDALS Due to the size and weight of the elliptical, moving it requires two persons. Each pedal can be adjusted to First, loosen the several positions. upright knob (A). To adjust each Next, pull the pedal, simply pull...
- Page 13 HOW TO EXERCISE ON THE ELLIPTICAL See HOW TO MOVE THE ELLIPTICAL on page 12 and lower the upright to the folded position. To mount the elliptical, hold the handlebars (I) or the upper body arms (J) and step onto the pedal (K) that is Next, hold the handle (L) on the front stabilizer (P) and in the lower position.
- Page 14 CONSOLE DIAGRAM FEATURES OF THE CONSOLE When you use the manual mode of the console, you can change the resistance of the pedals and the incline The advanced console offers an array of features of the frame with the touch of a button. designed to make your workouts more effective and enjoyable.
- Page 15 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the elliptical has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you use the perature before you turn on the power.
- Page 16 HOW TO SET UP THE CONSOLE 5. Check for firmware updates. Before you use the elliptical for the first time, set up the First, touch the profile button, touch Settings, touch Maintenance, and then touch Update. The console. console will check for firmware updates. For more 1.
- Page 17 HOW TO USE THE MANUAL MODE To select the desired display mode or to view statistics and charts, drag downward on the screen. 1. Touch the screen or press any button on the You can also touch the more button (+ symbol) to console to turn on the console.
- Page 18 When your pulse is detected, your heart rate HOW TO USE A MAP WORKOUT OR AN ONBOARD will be shown. For the most accurate heart WORKOUT rate reading, hold the contacts for at least 15 seconds. 1. Touch the screen or press any button on the console to turn on the console.
- Page 19 To draw your own map for a workout, see HOW TO can then manually control the resistance level CREATE A DRAW-YOUR-OWN-MAP WORKOUT (see step 3 on page 17). If you press a Ramp on page 20. button, you can then manually control the incline level (see step 3 on page 17).
- Page 20 HOW TO CREATE A DRAW-YOUR-OWN-MAP If you make a mistake, touch Undo on the left side WORKOUT of the screen. 1. Touch the screen or press any button on the The screen will display the elevation and distance console to turn on the console. statistics for your workout.
- Page 21 HOW TO USE AN IFIT WORKOUT 4. Select an iFit workout that you have previously added to your schedule on iFit.com. To use an iFit workout, the console must be connected IMPORTANT: Before iFit workouts will load, you to a wireless network (see HOW TO CONNECT TO A must add them to your schedule on iFit.com WIRELESS NETWORK on page 23).
- Page 22 HOW TO CHANGE CONSOLE SETTINGS 3. View the console tour presentation. IMPORTANT: Some of the settings and features To view a tour presentation that will guide you described may not be enabled. Occasionally, a through the features of the console, touch How It firmware update may cause your console to function Works.
- Page 23 7. Calibrate the incline system. 3. Enable Wi-Fi. To calibrate the incline system, touch Maintenance, Make sure that Wi-Fi is enabled. If it is not ® touch Calibrate Incline, and then touch Begin. The enabled, touch the Wi-Fi toggle to enable it. frame will automatically rise to the maximum incline level, lower to the minimum incline level, and then 4.
- Page 24 HOW TO USE THE SOUND SYSTEM HOW TO CONNECT AN HDMI CABLE To play music or audio books through the console To show your console screen on a TV or monitor, plug sound system while you exercise, plug a 3.5 mm male an HDMI cable (not included) into the port on the con- sole and into a port on your TV or monitor;...
-
Page 25: Fcc Information
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 26: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE If you are having problems connecting the console to a wireless network or if you are having problems Regular maintenance is important for optimal with your iFit account or iFit workouts, go to performance and to reduce wear. Inspect and properly support.iFit.com. - Page 27 HOW TO ADJUST THE REED SWITCH See the lower drawing at the left. Slightly loosen the two indicated M4 x 16mm Screws (61). Slide the Reed If the console does not display correct feedback, the Switch (58) slightly toward or away from the Magnet reed switch should be adjusted.
- Page 28 HOW TO ADJUST THE DRIVE BELT See the lower drawing at the left. Remove the four M4 x 16mm Screws (not shown) from the Large If the pedals slip while you are pedaling, even while the Storage Foot (27), and remove the Large Storage resistance is adjusted to the highest setting, the drive Foot.
-
Page 29: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. - Page 30 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch; never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
-
Page 31: Part List
PART LIST Model No. PFEL09716.2 R0118A Key No. Qty. Description Key No. Qty. Description Frame Small Storage Foot Upright Idler Rear Upright Cover Small Spacer Console Resistance Motor Accessory Tray Axle Cover Right Upper Body Leg M4 x 12mm Washer Head Screw... - Page 32 Key No. Qty. Description Key No. Qty. Description Left Upper Body Leg Right Pedal Pad Upright Axle Left Pedal Pad M8 x 20mm Hex Bolt Right Pedal Handle Lift Frame Left Pedal Handle Lift Motor Right Pedal Plate Control Board Left Pedal Plate Control Board Bracket Lift Motor Axle...
-
Page 33: Exploded Drawing
EXPLODED DRAWING A Model No. PFEL09716.2 R0118A... - Page 34 EXPLODED DRAWING B Model No. PFEL09716.2 R0118A...
- Page 35 EXPLODED DRAWING C Model No. PFEL09716.2 R0118A...
-
Page 36: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...