Parksense Sensors; Enabling And Disabling Parksense; Instrument Cluster Display - Warning; Parksense System Usage Precautions - Jeep Compass 2018 User Manual

ParkSense Sensors

The four ParkSense sensors, located in the
rear fascia/bumper, monitor the area behind
the vehicle that is within the sensors' field of
view. The sensors can detect obstacles from
approximately 12 inches (30 cm) up to
79 inches (200 cm) from the rear fascia/
bumper in the horizontal direction, depend-
ing on the location, type and orientation of
the obstacle.

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled with
the ParkSense switch, located on the switch
panel below the Uconnect display.
ParkSense Switch
168
When the ParkSense switch is pushed to
disable the system, the instrument cluster
display will show the "PARKSENSE OFF"
message for approximately five seconds. Re-
fer to "Instrument Cluster Display" in "Get-
ting To Know Your Instrument Panel" in your
Owner's Manual for further details. When the
gear selector is moved to REVERSE and the
system is disabled, the instrument cluster
display will show the "PARKSENSE OFF"
message for as long as the vehicle is in
REVERSE.
The ParkSense switch LED will be on when
ParkSense is disabled or requires service.
The ParkSense switch LED will be off when
the system is enabled. If the ParkSense
switch is pushed, and requires service, the
ParkSense switch LED will blink momen-
tarily, and then the LED will be on.
Instrument Cluster Display — Warning
The ParkSense Warning screen will only be
displayed if Sound and Display is selected
from the Customer - Programmable Features
section of the Uconnect System. Refer to
"Uconnect Settings" in "Multimedia" in your
Owner's Manual for further information.
The ParkSense Warning screen is located
within the instrument cluster display. It pro-
vides visual warnings to indicate the distance
between the rear fascia/bumper and the de-
tected obstacle. Refer to "Instrument Cluster
Display" in your Owner's Manual for further
information.

ParkSense System Usage Precautions

NOTE:
• Ensure that the rear bumper is free of snow,
ice, mud, dirt and debris to keep the
ParkSense system operating properly.
• Jackhammers, large trucks, and other vi-
brations could affect the performance of
ParkSense.
• When you turn ParkSense OFF, the instru-
ment cluster display
"PARKSENSE OFF" Furthermore, once you
turn ParkSense OFF, it remains off until you
turn it on again, even if you cycle the
ignition.
• ParkSense, when on, will reduce the vol-
ume of the radio when it is sounding a tone.
will read