1 6 | Bosch IDS BOVA
12
Electrical - high voltage
12.1
High voltage power supply
WARNING: LIVE ELECTRICAL COMPONENTS!
During installation, testing, servicing, and trouble shooting of
this product, it may be necessary to work with live electrical
components. Failure to follow all electrical safety precautions
when exposed to live electrical components could result in
death or serious injury.
The high voltage power supply must agree with the equipment nameplate.
Power wiring must comply with national, state, and local codes.
Follow instructions on unit wiring diagram located on the inside of the control box
cover and in the Service Facts document included with the unit.
Figure 27
Data subject to change
12.2
High voltage disconnect switch
Install a separate disconnect switch at the outdoor unit.
Field provided fl exible electrical conduit must be used for high voltage wiring.
Figure 28
12.3
High voltage ground
Ground the outdoor unit per national, state, and local code requirements.
Figure 29
Installation Instructions
12.2016 | Bosch Thermotechnology Corp.