Start The Programme - The End Of A Programme - Miele WCR 860 WPS Operating Instructions Manual

6. Start the programme - the end of a programme

Starting a programme
The programme can be started when
the Start/Stop sensor is flashing on and
off.
 Touch the Start/Stop sensor.
The door will lock ( will appear in the
display) and the programme will start.
The programme status will appear in
the display.
 Status

Time left
Cottons
The washing machine will keep you
updated on the programme status and
the time remaining for the programme
to run.
If a Delay start time has been selected,
this will count down in the display until
the programme starts.
The drum lighting switches off once the
programme has started.
End of programme
The door remains locked during the
anti-crease phase and
and Unlock with "Start/Stop"
the display.
 Touch the Start/Stop sensor. The
door will unlock.
The door unlocks automatically at the
end of the anti-crease phase.
 11:02

2:27 h
Main wash
Add laundry
Finish/Anti-crease
appear in
 Pull open the door.
 Remove the laundry.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.
 Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip: Leave the door slightly open to
allow the drum to dry.
 Switch the washing machine off with
the  control.
 If applicable, remove the used
capsule from the detergent
dispensing drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
39